Channel wing

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The channel wing is an aircraft wing principle that places an engine in the middle of a half-tube driving a propeller placed at the rear end of the channel formed by the half-tube. It was developed by Willard Ray Custer in the 1920s. The basic idea is to use a ducted fan to increase the velocity of the airflow as it passes through the duct.

Normally the duct it circular, but by cutting away the upper part the resulting lift from the high-velocity air produces lift upward only. It shares some features with the coleopter, which uses a circular duct to produce a true VTOL aircraft. Although channel wing aircraft demonstrated improved takeoff and landing performance, they had several drawbacks and were never widely used.

A significant issue is that there is no way to "turn off" the lift as long as the engine is running; in the case of a single-engine failure on a twin-engine plane, this leads to dramatically more lift on one wing than the other, making it very difficult to control. It also introduces a challenging mechanical design which generally leads to higher weights.

The channel wing is an aircraft wing principle that places an engine in the middle of a half-tube driving a propeller placed at the rear end of the channel formed by the half-tube. It was developed by Willard Ray Custer in the 1920s. The basic idea is to use a ducted fan to increase the velocity of the airflow as it passes through the duct.

Normally the duct it circular, but by cutting away the upper part the resulting lift from the high-velocity air produces lift upward only. It shares some features with the coleopter, which uses a circular duct to produce a true VTOL aircraft. Although channel wing aircraft demonstrated improved takeoff and landing performance, they had several drawbacks and were never widely used.

A significant issue is that there is no way to "turn off" the lift as long as the engine is running; in the case of a single-engine failure on a twin-engine plane, this leads to dramatically more lift on one wing than the other, making it very difficult to control. It also introduces a challenging mechanical design which generally leads to higher weights.

Further reading

Video of Custer explaining his theories and actual flight footage Pictures of the Custer CCW-1 National Air and Space Museum Pictures of the Custer CCW-5 Mid-Atlantic Air Museum, Reading, Pennsylvania Modern channelwing aircraft design Stavatti Aersopace designed channelwing transport for the 2000s Custer's Channel Wing

Text derived from https://en.wikipedia.org/w/index.php?oldid=1375226542 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

2 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.