Lesson plan

Channel wing

The channel wing is an aircraft wing principle that places an engine in the middle of a half-tube driving a propeller placed at the rear end of the channel formed by the half-tube. It was developed by Willard Ray Custer in the 1920s. The basic idea is to use a ducted fan to increase the velocity of the airflow as it passes through the duct. Normally the duct it circular, but by cutting away the upper part the resulting lift from the high-velocity air produces lift upward only. It shares some features with the coleopter, which uses a circular duct to produce a true VTOL aircraft. Although channel wing aircraft demonstrated improved takeoff and landing performance, they had several drawbacks and were never widely used. A significant issue is that there is no way to "turn off" the lift as long as the engine is running; in the case of a single-engine failure on a twin-engine plane, this leads to dramatically more lift on one wing than the other, making it very difficult to control. It also introduces a challenging mechanical design which generally leads to higher weights.

Back to article

Article summary

The channel wing is an aircraft wing principle that places an engine in the middle of a half-tube driving a propeller placed at the rear end of the channel formed by the half-tube. It was developed by Willard Ray Custer in the 1920s. The basic idea is to use a ducted fan to increase the velocity of the airflow as it passes through the duct. Normally the duct it circular, but by cutting away the upper part the resulting lift from the high-velocity air produces lift upward only. It shares some features with the coleopter, which uses a circular duct to produce a true VTOL aircraft. Although channel wing aircraft demonstrated improved takeoff and landing performance, they had several drawbacks and were never widely used. A significant issue is that there is no way to "turn off" the lift as long as the engine is running; in the case of a single-engine failure on a twin-engine plane, this leads to dramatically more lift on one wing than the other, making it very difficult to control. It also introduces a challenging mechanical design which generally leads to higher weights.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.