Closed-loop communication

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Closed-loop communication is a communication technique used to avoid misunderstandings. Under this technique, any sent message is repeated back to the sender who then confirms the accuracy or indicates an error. In the case that the repeated message is incorrect, the sender will then repeat the cycle by restating the original message. If the person sending the message does not receive a reply, they must repeat it until the receiver starts closing the loop. To gain the attention of the receiver, the sender can use the receiver's name or functional position, touch their shoulder, etc.

Closed-loop communication is a communication technique used to avoid misunderstandings. Under this technique, any sent message is repeated back to the sender who then confirms the accuracy or indicates an error. In the case that the repeated message is incorrect, the sender will then repeat the cycle by restating the original message. If the person sending the message does not receive a reply, they must repeat it until the receiver starts closing the loop. To gain the attention of the receiver, the sender can use the receiver's name or functional position, touch their shoulder, etc.

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1369740133 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

7 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.