Lesson plan
Closed-loop communication
Closed-loop communication is a communication technique used to avoid misunderstandings. Under this technique, any sent message is repeated back to the sender who then confirms the accuracy or indicates an error. In the case that the repeated message is incorrect, the sender will then repeat the cycle by restating the original message. If the person sending the message does not receive a reply, they must repeat it until the receiver starts closing the loop. To gain the attention of the receiver, the sender can use the receiver's name or functional position, touch their shoulder, etc.
Article summary
Closed-loop communication is a communication technique used to avoid misunderstandings. Under this technique, any sent message is repeated back to the sender who then confirms the accuracy or indicates an error. In the case that the repeated message is incorrect, the sender will then repeat the cycle by restating the original message. If the person sending the message does not receive a reply, they must repeat it until the receiver starts closing the loop. To gain the attention of the receiver, the sender can use the receiver's name or functional position, touch their shoulder, etc.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.