Crossover cable

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

cable. A crossover cable connects two devices of the same type, for example DTE-DTE or DCE-DCE, usually connected asymmetrically (DTE-DCE), by a modified cable called a crosslink. Such a distinction between devices was introduced by IBM. The crossing of wires in a cable or in a connector adaptor allows: * connecting two devices directly, output of one to input of the other, * letting two terminal (DTE) devices communicate without an interconnecting hub knot, i.e. PCs, * linking two or more hubs, switches or routers (DCE) together, possibly to work as one wider device. In contrast, a straight-through cable uses direct wiring to connect complementary devices, e.g. a PC to a switch.

cable.]] A crossover cable connects two devices of the same type, for example DTE-DTE or DCE-DCE, usually connected asymmetrically (DTE-DCE), by a modified cable called a crosslink. Such a distinction between devices was introduced by IBM. The crossing of wires in a cable or in a connector adaptor allows: connecting two devices directly, output of one to input of the other, letting two terminal (DTE) devices communicate without an interconnecting hub knot, i.e. PCs, linking two or more hubs, switches or routers (DCE) together, possibly to work as one wider device. In contrast, a straight-through cable uses direct wiring to connect complementary devices, e.g. a PC to a switch.

Concept

Straight-through cables are used for most applications, but crossover cables are required in others. In a straight-through cable, pins on one end correspond exactly to the corresponding pins on the other end (pin 1 to pin 1, pin 2 to pin 2, etc.). Using the same wiring scheme at each end yields a straight-through cable (a given color wire connects to a given number pin, the same at both ends). In this case, the terminations are identical, so only one pinout is required. In a crossover cable, pins do not correspond some or all of the conductors are swapped at the terminations. For example, if pin 1 on one end goes to pin 2 on the other end, then pin 2 on one end goes to pin 1 on the other end, and the other pins remain unaffected. Such crossover cables are electrically symmetrical, meaning that they work identically regardless of which way you plug them in (if you turn the cable around, it still connects the same pins as before). Using different wiring at each end yields a crossover cable (a given color wire connects to one number pin at one end, and a different number pin at the other).

Examples

]] Null modem of RS-232 Ethernet crossover cable Rollover cable A loopback is a type of degraded "one side crosslinked connection" connecting a port to itself, usually for test purposes.

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1310767451 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.