Lesson plan

Crossover cable

cable. A crossover cable connects two devices of the same type, for example DTE-DTE or DCE-DCE, usually connected asymmetrically (DTE-DCE), by a modified cable called a crosslink. Such a distinction between devices was introduced by IBM. The crossing of wires in a cable or in a connector adaptor allows: * connecting two devices directly, output of one to input of the other, * letting two terminal (DTE) devices communicate without an interconnecting hub knot, i.e. PCs, * linking two or more hubs, switches or routers (DCE) together, possibly to work as one wider device. In contrast, a straight-through cable uses direct wiring to connect complementary devices, e.g. a PC to a switch.

Back to article

Article summary

cable. A crossover cable connects two devices of the same type, for example DTE-DTE or DCE-DCE, usually connected asymmetrically (DTE-DCE), by a modified cable called a crosslink. Such a distinction between devices was introduced by IBM. The crossing of wires in a cable or in a connector adaptor allows: * connecting two devices directly, output of one to input of the other, * letting two terminal (DTE) devices communicate without an interconnecting hub knot, i.e. PCs, * linking two or more hubs, switches or routers (DCE) together, possibly to work as one wider device. In contrast, a straight-through cable uses direct wiring to connect complementary devices, e.g. a PC to a switch.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.