Cunningham correction factor

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In fluid dynamics, the Cunningham correction factor, or Cunningham slip correction factor (denoted ), is used to account for non-continuum effects when calculating the drag on small particles. The derivation of Stokes' law, which is used to calculate the drag force on small particles, assumes a no-slip condition which is no longer correct at high Knudsen numbers. The Cunningham slip correction factor allows predicting the drag force on a particle moving a fluid with Knudsen number between the continuum regime and free molecular flow. The drag coefficient calculated with standard correlations is divided by the Cunningham correction factor, , given below. Ebenezer Cunningham derived the correction factor in 1910 and with Robert Andrews Millikan, verified the correction in the same year. : C = 1+ \frac{2\lambda}{d} \left(A_1+A_2 e^{\frac{-A_3 d}{\lambda}} \right) where * is the correction factor * is the mean free path * is the particle diameter * are experimentally determined coefficients. :For air (Davies, 1945): ::A 1 = 1.257 ::A 2 = 0.400 ::A 3 = 0.55 The Cunningham correction factor becomes significant when particles become smaller than 15 micrometers, for air at ambient conditions. For sub-micrometer particles, Brownian motion must be taken into account.

In fluid dynamics, the Cunningham correction factor, or Cunningham slip correction factor (denoted ), is used to account for non-continuum effects when calculating the drag on small particles. The derivation of Stokes' law, which is used to calculate the drag force on small particles, assumes a no-slip condition which is no longer correct at high Knudsen numbers. The Cunningham slip correction factor allows predicting the drag force on a particle moving a fluid with Knudsen number between the continuum regime and free molecular flow. The drag coefficient calculated with standard correlations is divided by the Cunningham correction factor, , given below. Ebenezer Cunningham derived the correction factor in 1910 and with Robert Andrews Millikan, verified the correction in the same year. C = 1+ \frac{2\lambda}{d} \left(A_1+A_2 e^{\frac{-A_3 d}{\lambda}} \right) where is the correction factor is the mean free path is the particle diameter are experimentally determined coefficients. For air (Davies, 1945): A 1 = 1.257 A 2 = 0.400 A 3 = 0.55 The Cunningham correction factor becomes significant when particles become smaller than 15 micrometers, for air at ambient conditions. For sub-micrometer particles, Brownian motion must be taken into account.

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1266445621 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.