Lesson plan

Damping factor

In an audio power amplifier, the damping factor is defined as the ratio of the rated impedance of the loudspeaker (usually assumed to be ) to the source impedance of the power amplifier. It was originally proposed in 1941. Only the magnitude of the loudspeaker impedance is used, and the power amplifier output impedance is assumed to be totally resistive. In typical solid state and tube amplifiers, the damping factor varies as a function of frequency. In solid-state amplifiers, the damping factor usually has a maximum value at low frequencies, and it reduces progressively at higher frequencies. The figure to the right shows the damping factor of two amplifiers. One is a solid-state amplifier (Luxman L-509u) and the other is a tube amplifier (Rogue Atlas). These results are fairly typical of these two types of amplifiers, and they serve to illustrate the fact that tube amplifiers usually have much lower damping factors than modern solid-state amplifiers, which is an undesirable characteristic.

Back to article

Article summary

In an audio power amplifier, the damping factor is defined as the ratio of the rated impedance of the loudspeaker (usually assumed to be ) to the source impedance of the power amplifier. It was originally proposed in 1941. Only the magnitude of the loudspeaker impedance is used, and the power amplifier output impedance is assumed to be totally resistive. In typical solid state and tube amplifiers, the damping factor varies as a function of frequency. In solid-state amplifiers, the damping factor usually has a maximum value at low frequencies, and it reduces progressively at higher frequencies. The figure to the right shows the damping factor of two amplifiers. One is a solid-state amplifier (Luxman L-509u) and the other is a tube amplifier (Rogue Atlas). These results are fairly typical of these two types of amplifiers, and they serve to illustrate the fact that tube amplifiers usually have much lower damping factors than modern solid-state amplifiers, which is an undesirable characteristic.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.