Lesson plan

DBm0

dBm0 is an abbreviation for the power in decibel-milliwatts (dBm) measured at a zero transmission level point (ZLP). dBm0 is a concept used (amongst other areas) in audio/telephony processing since it allows a smooth integration of analog and digital chains. Notably, for A-law and μ-law codecs the standards define a sequence which has a output. The unit dBm0 is used to describe levels of digital as well as analog signals and is derived from its counterpart dBm. Although today dBm0 may be considered supplanted by the similar unit decibels relative to full scale (dBFS) (discussion at ), dBm0 can be viewed as connecting both the old world of analog telecommunication and the new world of digital communication. The level corresponds to the digital milliwatt (DMW) and is defined as the absolute power level at a digital reference point of the same signal that would be measured as the absolute power level, in dBm, if the reference point was analog. The absolute power in dBm scale for a power in milliwatts (mW) is defined as: 10 \log_{10} \frac{P}{1~\text{[mW]}} \, . When the test impedance is resistive, can be referred to a voltage of , which results in a reference active power of . Then corresponds to an overload level of approximately in the analog-to-digital conversion.…

Back to article

Article summary

dBm0 is an abbreviation for the power in decibel-milliwatts (dBm) measured at a zero transmission level point (ZLP). dBm0 is a concept used (amongst other areas) in audio/telephony processing since it allows a smooth integration of analog and digital chains. Notably, for A-law and μ-law codecs the standards define a sequence which has a output. The unit dBm0 is used to describe levels of digital as well as analog signals and is derived from its counterpart dBm. Although today dBm0 may be considered supplanted by the similar unit decibels relative to full scale (dBFS) (discussion at ), dBm0 can be viewed as connecting both the old world of analog telecommunication and the new world of digital communication. The level corresponds to the digital milliwatt (DMW) and is defined as the absolute power level at a digital reference point of the same signal that would be measured as the absolute power level, in dBm, if the reference point was analog. The absolute power in dBm scale for a power in milliwatts (mW) is defined as: 10 \log_{10} \frac{P}{1~\text{[mW]}} \, . When the test impedance is resistive, can be referred to a voltage of , which results in a reference active power of . Then corresponds to an overload level of approximately in the analog-to-digital conversion.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.