DFFITS

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In statistics, DFFIT and DFFITS ("difference in fit(s)") are diagnostics meant to show how influential a point is in a linear regression, first proposed in 1980. DFFIT is the change in the predicted value for a point, obtained when that point is left out of the regression: : \text{DFFIT} = \widehat{y}_i - \widehat{y}_{i(i)} where \widehat{y}_i and \widehat{y}_{i(i)} are the prediction for point i with and without point i included in the regression. DFFITS is the Studentized DFFIT, where Studentization is achieved by dividing by the estimated standard deviation of the fit at that point: : \text{DFFITS} = \frac{\text{DFFIT}}{s_{(i)} \sqrt{h_{ii}}} where s_{(i)} is the standard error estimated without the point in question, and h_{ii} is the leverage for the point. DFFITS also equals the products of the externally Studentized residual ( t_{i(i)} ) and the leverage factor ( \sqrt{h_{ii}/(1-h_{ii})} ): : \text{DFFITS} = t_{i(i)} \sqrt{\frac{h_{ii}}{1-h_{ii}}} Thus, for low leverage points, DFFITS is expected to be small, whereas, as the leverage goes to 1, the distribution of the DFFITS value widens infinitely. For a perfectly balanced experimental design (such as a factorial design or balanced partial factorial design), the leverage for each point is p/n, the number of parameters divided by the number of points.…

In statistics, DFFIT and DFFITS ("difference in fit(s)") are diagnostics meant to show how influential a point is in a linear regression, first proposed in 1980. DFFIT is the change in the predicted value for a point, obtained when that point is left out of the regression: \text{DFFIT} = \widehat{y}_i - \widehat{y}_{i(i)} where \widehat{y}_i and \widehat{y}_{i(i)} are the prediction for point i with and without point i included in the regression. DFFITS is the Studentized DFFIT, where Studentization is achieved by dividing by the estimated standard deviation of the fit at that point: \text{DFFITS} = \frac{\text{DFFIT}}{s_{(i)} \sqrt{h_{ii}}} where s_{(i)} is the standard error estimated without the point in question, and h_{ii} is the leverage for the point. DFFITS also equals the products of the externally Studentized residual ( t_{i(i)} ) and the leverage factor ( \sqrt{h_{ii}/(1-h_{ii})} ): \text{DFFITS} = t_{i(i)} \sqrt{\frac{h_{ii}}{1-h_{ii}}} Thus, for low leverage points, DFFITS is expected to be small, whereas, as the leverage goes to 1, the distribution of the DFFITS value widens infinitely. For a perfectly balanced experimental design (such as a factorial design or balanced partial factorial design), the leverage for each point is p/n, the number of parameters divided by the number of points. This means that the DFFITS values will be distributed (in the Gaussian case) as \sqrt{p \over n-p} \approx \sqrt{p \over n} times a t variate. Therefore, the authors suggest investigating those points with DFFITS greater than 2\sqrt{p \over n} . Although the raw values resulting from the equations are different, Cook's distance and DFFITS are conceptually identical and there is a closed-form formula to convert one value to the other.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1351221263 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001351221263 · captured 1777220059.0 · version history

Cite this page as: encyclopegia.org, “DFFITS”, snapshot enwiki-001351221263. https://encyclopegia.org/a/dffits

Sources cited in this revision

2 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.