Lesson plan
DisplayPort
DisplayPort (DP) is a digital interface used to connect a video source, such as a computer, to a display device like a monitor. Developed by the Video Electronics Standards Association (VESA), it can also carry digital audio, USB, and other types of data over a single cable. Introduced in 2008, DisplayPort was designed to replace older standards like VGA, DVI, and FPD-Link. While not directly compatible with these formats, adapters are available for connecting to HDMI, DVI, VGA, and other interfaces. Unlike older interfaces, DisplayPort uses packet-based transmission, similar to how data is sent over USB or Ethernet. The design enables support for high resolutions and adding new features without changing the connector. DisplayPort includes an auxiliary data channel used for device control and automatic configuration between source and display devices. It supports standards such as Display Data Channel (DDC), Extended Display Identification Data (EDID), Monitor Control Command Set (MCCS), and VESA Display Power Management Signaling (DPMS). Some implementations also support Consumer Electronics Control (CEC), which allows devices to send commands to each other and be operated using a single remote control.
Article summary
DisplayPort (DP) is a digital interface used to connect a video source, such as a computer, to a display device like a monitor. Developed by the Video Electronics Standards Association (VESA), it can also carry digital audio, USB, and other types of data over a single cable. Introduced in 2008, DisplayPort was designed to replace older standards like VGA, DVI, and FPD-Link. While not directly compatible with these formats, adapters are available for connecting to HDMI, DVI, VGA, and other interfaces. Unlike older interfaces, DisplayPort uses packet-based transmission, similar to how data is sent over USB or Ethernet. The design enables support for high resolutions and adding new features without changing the connector. DisplayPort includes an auxiliary data channel used for device control and automatic configuration between source and display devices. It supports standards such as Display Data Channel (DDC), Extended Display Identification Data (EDID), Monitor Control Command Set (MCCS), and VESA Display Power Management Signaling (DPMS). Some implementations also support Consumer Electronics Control (CEC), which allows devices to send commands to each other and be operated using a single remote control.
Key claims
- release date: 2013 — source: Wikipedia · confidence 0.95
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- The record states that the release date is "2013". What evidence would count against this claim?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
- Wikipedia https://en.wikipedia.org/w/index.php?oldid=1376835214
Key claims and bibliography are generated from the same tracked claims and sources as the article page.