Diversity factor
≈ 4 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
In the context of electricity, the diversity factor is the ratio of the sum of the individual non-coincident maximum loads of various subdivisions of the system to the maximum demand of the complete system. It is a way to quantify the diversity among consumer classes. : f_\text{Diversity} = \frac{\sum\limits_{i=1}^n\text{Individual peak load}_i}{\sum\limits_{i=1}^n\text{Max}(\text{Aggregated load}_i)} The diversity factor is always greater than 1. The aggregate load \left( \sum\limits_{i=1}^n\text{Aggregated load}_i \right) is time dependent as well as being dependent upon equipment characteristics. The diversity factor recognizes that the whole load does not equal the sum of its parts due to this time interdependence or "diversity." For example, one might have ten air conditioning units that are 20 tons each at a facility with an average full load equivalent operating hours of 2000 hours per year. However, since the units are each thermostatically controlled, it is not known exactly when each unit turns on. If the ten units are substantially larger than the facility's actual peak AC load, then fewer than all ten units will likely come on at once. Thus, even though each unit runs a total of a couple of thousand (2000) hours a year, they do not all come on at the same time to affect the facility's peak load.…
In the context of electricity, the diversity factor is the ratio of the sum of the individual non-coincident maximum loads of various subdivisions of the system to the maximum demand of the complete system. It is a way to quantify the diversity among consumer classes. f_\text{Diversity} = \frac{\sum\limits_{i=1}^n\text{Individual peak load}_i}{\sum\limits_{i=1}^n\text{Max}(\text{Aggregated load}_i)} The diversity factor is always greater than 1. The aggregate load \left( \sum\limits_{i=1}^n\text{Aggregated load}_i \right) is time dependent as well as being dependent upon equipment characteristics. The diversity factor recognizes that the whole load does not equal the sum of its parts due to this time interdependence or "diversity." For example, one might have ten air conditioning units that are 20 tons each at a facility with an average full load equivalent operating hours of 2000 hours per year. However, since the units are each thermostatically controlled, it is not known exactly when each unit turns on. If the ten units are substantially larger than the facility's actual peak AC load, then fewer than all ten units will likely come on at once. Thus, even though each unit runs a total of a couple of thousand (2000) hours a year, they do not all come on at the same time to affect the facility's peak load. The diversity factor provides a correction factor to use, resulting in a lower total power load for the ten AC units. If the energy balance done for this facility comes out within reason, but the demand balance shows far too much power for the peak load, then one can use the diversity factor to bring the power into line with the facility's true peak load. The diversity factor does not affect the energy; it only affects the power. f_\text{Diversification} = \frac{\text{Diversified Load}}{\text{Maximum system load}}
In electrical engineering
Diversity factor is commonly used for a number of engineering-related topics. One such instance is when completing a coordination study for a system. This diversity factor is used to estimate the load of a particular node in the system.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1363754583 under CC BY-SA 4.0; modifications have been made.