drag equation

Uses your system voice; voice and rate in settings.

Q9300786Snapshot

≈ 9 min read

Names in other languages

  • TürkçeSürüklenim Denklemi
  • Portuguêsequação do arrasto
  • Englishdrag equation
  • العربيةمعادلة السحب
  • 中文阻力方程
  • 简体中文阻力方程
  • 繁體中文阻力方程
  • 中文阻力方程

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In fluid dynamics, the drag equation is a formula used to calculate the force of drag experienced by an object due to movement through a fully enclosing fluid. The equation is: F_{\rm d}\, =\, \tfrac12\, \rho\, u^2\, c_{\rm d}\, A where * F_{\rm d} is the drag force, which is by definition the force component in the direction of the flow velocity, * \rho is the mass density of the fluid, * u is the flow velocity relative to the object, * A is the reference area, and * c_{\rm d} is the drag coefficient – a dimensionless coefficient related to the object's geometry.

The equation is attributed to Lord Rayleigh, who originally used L 2 in place of A (with L being some linear dimension). The reference area A is typically defined as the area of the orthographic projection of the object on a plane perpendicular to the direction of motion.

For non-hollow objects with simple shape, such as a sphere, this is exactly the same as the maximal cross sectional area. For other objects (for instance, a rolling tube or the body of a cyclist), A may be significantly larger than the area of any cross section along any plane perpendicular to the direction of motion.

Airfoils use the square of the chord length as the reference area; since airfoil chords are usually defined with a length of 1, the reference area is also 1.…

In fluid dynamics, the drag equation is a formula used to calculate the force of drag experienced by an object due to movement through a fully enclosing fluid. The equation is: F_{\rm d}\, =\, \tfrac12\, \rho\, u^2\, c_{\rm d}\, A where F_{\rm d} is the drag force, which is by definition the force component in the direction of the flow velocity, \rho is the mass density of the fluid, u is the flow velocity relative to the object, A is the reference area, and c_{\rm d} is the drag coefficient – a dimensionless coefficient related to the object's geometry.

The equation is attributed to Lord Rayleigh, who originally used L 2 in place of A (with L being some linear dimension). The reference area A is typically defined as the area of the orthographic projection of the object on a plane perpendicular to the direction of motion.

For non-hollow objects with simple shape, such as a sphere, this is exactly the same as the maximal cross sectional area. For other objects (for instance, a rolling tube or the body of a cyclist), A may be significantly larger than the area of any cross section along any plane perpendicular to the direction of motion.

Airfoils use the square of the chord length as the reference area; since airfoil chords are usually defined with a length of 1, the reference area is also 1. Aircraft use the wing area (or rotor-blade area) as the reference area, which makes for an easy comparison to lift.

Airships and bodies of revolution use the volumetric coefficient of drag, in which the reference area is the square of the cube root of the airship's volume. Sometimes different reference areas are given for the same object in which case a drag coefficient corresponding to each of these different areas must be given.

The drag coefficient c_{\rm d} is defined in combination with the choice of reference area and captures both skin friction and form drag. If the fluid is a liquid, c_{\rm d} depends on the Reynolds number; if the fluid is a gas, c_{\rm d} depends on both the Reynolds number and the Mach number.

For sharp-cornered bluff bodies, like square cylinders and plates held transverse to the flow direction, this equation is applicable with the drag coefficient as a constant value when the Reynolds number is greater than 1000. For smooth bodies, like a cylinder, the drag coefficient may vary significantly until Reynolds numbers up to 10 7 (ten million).

F_{\rm d} \propto P_{\rm D} A where P D is the pressure exerted by the fluid on area A. Here the pressure P D is referred to as dynamic pressure due to the kinetic energy of the fluid experiencing relative flow velocity u. This is defined in similar form as the kinetic energy equation: P_{\rm D} = \frac12 \rho u^2 P=\frac{D}{A}\Rightarrow D=PA From Bernoulli's equation P=\frac{1}{2}\rho v^{2}+\rho g\Delta h Combine those two equations and you get D=(\frac{1}{2}\rho v^{2}+\rho g\Delta h) A Then plug in the drag coefficient C which takes into account other parameters as well and is experimentally found too. D=(\frac{1}{2}\rho v^{2}+\rho g\Delta h)AC And you get the drag equation.

But you may notice that it differs from the one you show above because it really does. This one has one more part: +\rho g\Delta h This is because the difference of height ∆h is usually ignored, because it is said to be tiny relative to what the other part of the equation gives us. Then we can get an equation like that: D=\frac{1}{2}C\rho Av^{2} Where: D is the magnitude of the drag force applied to the body moving relative to the fluid by the fluid C is the drag coefficient \rho is the density of the fluid A is the cross-sectional area of the body which is moving relative to the fluid v is the magnitude of the relative velocity between the body and the fluid.

This is 1 way of deriving an equation from which we can calculate the force that a fluid applies to a body which moves relative to it f_a(F_{\rm d}, u, A, \rho, \nu) = 0. This rather odd form of expression is used because it does not assume a one-to-one relationship. Here, f a is some (as-yet-unknown) function that takes five arguments.

Now the right-hand side is zero in any system of units; so it should be possible to express the relationship described by f a in terms of only dimensionless groups. There are many ways of combining the five arguments of f a to form dimensionless groups, but the Buckingham π theorem states that there will be two such groups.

The most appropriate are the Reynolds number, given by \mathrm{Re} = \frac{u\sqrt{A}}{\nu} and the drag coefficient, given by c_{\rm d} = \frac{F_{\rm d}}{\frac12 \rho A u^2}. Thus the function of five variables may be replaced by another function of only two variables: f_b\left(\frac{F_{\rm d}}{\frac12 \rho A u^2}, \frac{u \sqrt{A}}{\nu} \right) = 0. where f b is some function of two arguments.

The original law is then reduced to a law involving only these two numbers. Because the only unknown in the above equation is the drag force F d , it is possible to express it as \begin{align} \frac{F_{\rm d}}{\frac12 \rho A u^2} &= f_c\left(\frac{u \sqrt{A}}{\nu} \right) \\ F_{\rm d} &= \tfrac12 \rho A u^2 f_c(\mathrm{Re}) \\ c_{\rm d} &= f_c(\mathrm{Re}) \end{align} Thus the force is simply ρ A u 2 times some (as-yet-unknown) function f c of the Reynolds number Re – a considerably simpler system than the original five-argument function given above.

Dimensional analysis thus makes a very complex problem (trying to determine the behavior of a function of five variables) a much simpler one: the determination of the drag as a function of only one variable, the Reynolds number. If the fluid is a gas, certain properties of the gas influence the drag and those properties must also be taken into account.

Those properties are conventionally considered to be the absolute temperature of the gas, and the ratio of its specific heats. These two properties determine the speed of sound in the gas at its given temperature. The Buckingham pi theorem then leads to a third dimensionless group, the ratio of the relative velocity to the speed of sound, which is known as the Mach number.

Consequently when a body is moving relative to a gas, the drag coefficient varies with the Mach number and the Reynolds number. The analysis also gives other information for free, so to speak. The analysis shows that, other things being equal, the drag force will be proportional to the density of the fluid.

This kind of information often proves to be extremely valuable, especially in the early stages of a research project. To empirically determine the Reynolds number dependence, instead of experimenting on a large body with fast-flowing fluids (such as real-size airplanes in wind tunnels), one may just as well experiment using a small model in a flow of higher velocity because these two systems deliver similitude by having the same Reynolds number.

If the same Reynolds number and Mach number cannot be achieved just by using a flow of higher velocity it may be advantageous to use a fluid of greater density or lower viscosity.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1365285389 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot drag-equation-1040947-4744bc3e4148b63d · hash 4744bc3e4148b63d25a6fbf1fd3998159d57bca95f4c8dafd4b1b7563820b040 · captured 1784629697.0 · version history

Cite this page as: encyclopegia.org, “drag equation”, snapshot drag-equation-1040947-4744bc3e4148b63d. https://encyclopegia.org/a/drag-equation

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.