Lesson plan
drag equation
In fluid dynamics, the drag equation is a formula used to calculate the force of drag experienced by an object due to movement through a fully enclosing fluid. The equation is: F_{\rm d}\, =\, \tfrac12\, \rho\, u^2\, c_{\rm d}\, A where * F_{\rm d} is the drag force, which is by definition the force component in the direction of the flow velocity, * \rho is the mass density of the fluid, * u is the flow velocity relative to the object, * A is the reference area, and * c_{\rm d} is the drag coefficient – a dimensionless coefficient related to the object's geometry. The equation is attributed to Lord Rayleigh, who originally used L 2 in place of A (with L being some linear dimension). The reference area A is typically defined as the area of the orthographic projection of the object on a plane perpendicular to the direction of motion. For non-hollow objects with simple shape, such as a sphere, this is exactly the same as the maximal cross sectional area. For other objects (for instance, a rolling tube or the body of a cyclist), A may be significantly larger than the area of any cross section along any plane perpendicular to the direction of motion. Airfoils use the square of the chord length as the reference area; since airfoil chords are usually defined with a length of 1, the reference area is also 1.…
Article summary
In fluid dynamics, the drag equation is a formula used to calculate the force of drag experienced by an object due to movement through a fully enclosing fluid. The equation is: F_{\rm d}\, =\, \tfrac12\, \rho\, u^2\, c_{\rm d}\, A where * F_{\rm d} is the drag force, which is by definition the force component in the direction of the flow velocity, * \rho is the mass density of the fluid, * u is the flow velocity relative to the object, * A is the reference area, and * c_{\rm d} is the drag coefficient – a dimensionless coefficient related to the object's geometry. The equation is attributed to Lord Rayleigh, who originally used L 2 in place of A (with L being some linear dimension). The reference area A is typically defined as the area of the orthographic projection of the object on a plane perpendicular to the direction of motion. For non-hollow objects with simple shape, such as a sphere, this is exactly the same as the maximal cross sectional area. For other objects (for instance, a rolling tube or the body of a cyclist), A may be significantly larger than the area of any cross section along any plane perpendicular to the direction of motion. Airfoils use the square of the chord length as the reference area; since airfoil chords are usually defined with a length of 1, the reference area is also 1.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.