Lesson plan

Drainage density

Drainage density is a quantity used to describe physical parameters of a drainage basin. First described by Robert E. Horton, drainage density is defined as the total length of channel in a drainage basin divided by the total area, represented by the equation D_{d}=\frac{\sum{L}}{A_{basin}}. The quantity represents the average length of channel per unit area of catchment and has units \frac{\left[L\right]}{\left[L^2\right]} , which is often reduced to \left[L^{-1}\right] . Drainage density depends upon both climate and physical characteristics of the drainage basin. Soil permeability (infiltration difficulty) and underlying rock type affect the runoff in a watershed; impermeable ground or exposed bedrock will lead to an increase in surface water runoff and therefore to more frequent streams. Rugged regions or those with high relief will also have a higher drainage density than other drainage basins if the other characteristics of the basin are the same. When determining the total length of streams in a basin, both perennial and ephemeral streams should be considered. If a drainage basin contained only ephemeral streams, then the drainage density by the equation above would be calculated to be zero if the total length of streams was calculated using only perennial streams.…

Back to article

Article summary

Drainage density is a quantity used to describe physical parameters of a drainage basin. First described by Robert E. Horton, drainage density is defined as the total length of channel in a drainage basin divided by the total area, represented by the equation D_{d}=\frac{\sum{L}}{A_{basin}}. The quantity represents the average length of channel per unit area of catchment and has units \frac{\left[L\right]}{\left[L^2\right]} , which is often reduced to \left[L^{-1}\right] . Drainage density depends upon both climate and physical characteristics of the drainage basin. Soil permeability (infiltration difficulty) and underlying rock type affect the runoff in a watershed; impermeable ground or exposed bedrock will lead to an increase in surface water runoff and therefore to more frequent streams. Rugged regions or those with high relief will also have a higher drainage density than other drainage basins if the other characteristics of the basin are the same. When determining the total length of streams in a basin, both perennial and ephemeral streams should be considered. If a drainage basin contained only ephemeral streams, then the drainage density by the equation above would be calculated to be zero if the total length of streams was calculated using only perennial streams.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.