Electrical length

Uses your system voice; voice and rate in settings.

Snapshot

≈ 16 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In electrical engineering, electrical length is a dimensionless parameter equal to the physical length of an electrical conductor such as a cable or wire, divided by the wavelength of alternating current at a given frequency traveling through the conductor. In other words, it is the length of the conductor measured in wavelengths. It can alternately be expressed as an angle, in radians or degrees, equal to the phase shift the alternating current experiences traveling through the conductor.

Electrical length is defined for a conductor operating at a specific frequency or narrow band of frequencies. It varies according to the construction of the cable, so different cables of the same length operating at the same frequency can have different electrical lengths. A conductor is called electrically long if it has an electrical length much greater than one (i.e. it is much longer than the wavelength of the alternating current passing through it), and electrically short if it is much shorter than a wavelength.

Electrical lengthening and electrical shortening mean adding reactance (capacitance or inductance) to an antenna or conductor to increase or decrease its electrical length, usually for the purpose of making it resonant at a different resonant frequency.…

In electrical engineering, electrical length is a dimensionless parameter equal to the physical length of an electrical conductor such as a cable or wire, divided by the wavelength of alternating current at a given frequency traveling through the conductor. In other words, it is the length of the conductor measured in wavelengths. It can alternately be expressed as an angle, in radians or degrees, equal to the phase shift the alternating current experiences traveling through the conductor.

Electrical length is defined for a conductor operating at a specific frequency or narrow band of frequencies. It varies according to the construction of the cable, so different cables of the same length operating at the same frequency can have different electrical lengths. A conductor is called electrically long if it has an electrical length much greater than one (i.e. it is much longer than the wavelength of the alternating current passing through it), and electrically short if it is much shorter than a wavelength.

How it works

Electrical lengthening and electrical shortening mean adding reactance (capacitance or inductance) to an antenna or conductor to increase or decrease its electrical length, usually for the purpose of making it resonant at a different resonant frequency. This concept is used throughout electronics, and particularly in radio frequency circuit design, transmission line and antenna theory and design. Electrical length determines when wave effects (phase shift along conductors) become important in a circuit.

Ordinary lumped element electric circuits only work well for alternating currents at frequencies for which the circuit is electrically small (electrical length much less than one). For frequencies high enough that the wavelength approaches the size of the circuit (the electrical length approaches one) the lumped element model on which circuit theory is based becomes inaccurate, and transmission line techniques must be used. Electrical length is defined for conductors carrying alternating current (AC) at a single frequency or narrow band of frequencies.

An alternating electric current of a single frequency f is an oscillating sine wave which repeats with a period of T=1/f . This current flows through a given conductor such as a wire or cable at a particular phase velocity v_p . It takes time for later portions of the wave to reach a given point on the conductor so the spatial distribution of current and voltage along the conductor at any time is a moving sine wave.

After a time equal to the period T a complete cycle of the wave has passed a given point and the wave repeats; during this time a point of constant phase on the wave has traveled a distance of \lambda = v_p T = v_p/f so \lambda (Greek lambda) is the wavelength of the wave along the conductor, the distance between successive crests of the wave.

Background

The electrical length G of a conductor with a physical length of l at a given frequency f is the number of wavelengths or fractions of a wavelength of the wave along the conductor; in other words the conductor's length measured in wavelengths {{Equation box 1 |indent = |cellpadding = 0 |border = 1 |border colour = black |background colour = transparent |equation = \quad \text{Electrical length}\, G = {lf\over v_p} = {l \over \lambda} = {\text{Physical length} \over \text{Wavelength}} \quad }} The phase velocity v_p at which electrical signals travel along a transmission line or other cable depends on the construction of the line.

Therefore, the wavelength \lambda corresponding to a given frequency varies in different types of lines, thus at a given frequency different conductors of the same physical length can have different electrical lengths. \phi = 360^\circ{l \over \lambda} \, \text{degrees} \quad = 2\pi{l \over \lambda} \, \text{radians} In a vacuum an electromagnetic wave (radio wave) travels at the speed of light v_p = c = 2.9979×10 8 meters per second, and very close to this speed in air, so the free space wavelength of the wave is \lambda_\text{0} = c/f .

(in this article free space variables are distinguished by a subscript 0) Thus a physical length l of a radio wave in space or air has an electrical length of G_\text{0} = {l \over \lambda_\text{0}} = {lf \over c} wavelengths. In the SI system of units, empty space has a permittivity of \epsilon_\text{0} = 8.854×10 −12 F/m (farads per metre) and a magnetic permeability of \mu_\text{0} = 1.257×10 −6 H/m (henries per meter).

These universal constants determine the speed of light c = {1 \over \sqrt{\epsilon_\text{0}\mu_\text{0}}} and capacitance per unit length of a small section of line In most transmission lines, the series resistance of the wires and shunt conductance of the insulation is low enough that the line can be approximated as lossless (see diagram). This means the inductance and capacitance per unit length of the line determine the phase velocity.

In an electrical cable, for a cycle of the alternating current to move a given distance along the line, it takes time to charge the capacitance between the conductors, and the rate of change of the current is slowed by the series inductance of the wires. This determines the phase velocity v_p at which the wave moves along the line.

In cables and transmission lines an electrical signal travels at a rate determined by the effective shunt capacitance C and series inductance L per unit length of the transmission line v_p = {1 \over \sqrt{LC} } Some transmission lines consist only of bare metal conductors, if they are far away from other high permittivity materials their signals propagate at very close to the speed of light, c .

In most transmission lines the material construction of the line slows the velocity of the signal so it travels at a reduced phase velocity This property of the line is specified by a dimensionless number between 0 and 1 called the velocity factor \mathit{VF} : \mathit{VF} = {v_p \over c} characteristic of the type of line, equal to the ratio of signal velocity in the line to the speed of light. Most transmission lines contain a dielectric material (insulator) filling some or all of the space in between the conductors.

The permittivity \epsilon or dielectric constant of that material increases the distributed capacitance C in the cable, which reduces the velocity factor below unity. If there is a material with high magnetic permeability ( \mu ) in the line such as steel or ferrite which increases the distributed inductance L , it can also reduce \mathit{VF} , but this is almost never the case.

If all the space around the transmission line conductors containing the near fields was filled with a material of permittivity \epsilon and permeability \mu , the phase velocity on the line would be {{Equation box 1 |indent =: |cellpadding = 0 |border = 2 |border colour = black |background colour = transparent |equation = \;\;v_p = {1 \over \sqrt{\epsilon\mu}}\;    }} The effective permittivity \epsilon and permeability \mu per unit length of the line are frequently given as dimensionless constants; relative permittivity: \epsilon_\text{r} and relative permeability: \mu_\text{r} equal to the ratio of these parameters compared to the universal constants \epsilon_\text{0} and \mu_\text{0} \epsilon_\text{r} = {\epsilon \over \epsilon_\text{0}} \qquad \mu_\text{r} = {\mu \over \mu_\text{0}} so the phase velocity is v_\text{p} = {1 \over \sqrt{\epsilon\mu}} = {1 \over \sqrt{\epsilon_\text{0}\epsilon_\text{r}\mu_\text{0}\mu_\text{r}}} = c{1 \over \sqrt{\epsilon_\text{r}\mu_\text{r}}} So the velocity factor of the line is \mathit{VF} = {v_p \over c} = {1 \over \sqrt{\epsilon_\text{r}\mu_\text{r}}} In many lines, for example twin lead, only a fraction of the space surrounding the line containing the fields is occupied by a solid dielectric.

With only part of the electromagnetic field effected by the dielectric, there is less reduction of the wave velocity. In this case an effective permittivity \epsilon_\text{eff} can be calculated which if it filled all the space around the line would give the same phase velocity. This is computed as a weighted average of the relative permittivity of free space, unity, and that of the dielectric: \epsilon_\text{eff}= (1-F) + F \epsilon_\text{r} where the fill factor expresses the effective proportion of space around the line occupied by dielectric.

In most transmission lines there are no materials with high magnetic permeability, so \mu = \mu_\text{0} and \mu_\text{r} = 1 and so {{Equation box 1 |indent =: |cellpadding = 0 |border = 2 |border colour = black |background colour = transparent |equation = \;\;\mathit{VF} = {1 \over \sqrt{\epsilon_\text{eff}}}\; (no magnetic materials)     }} Since the electromagnetic waves travel slower in the line than in free space, the wavelength of the wave in the transmission line \lambda is shorter than the free space wavelength by the factor VF: \lambda = v_\text{p}/f = \mathit{VF}(c/f) = \lambda_\text{0}\mathit{VF} .

Therefore, more wavelengths fit in a transmission line of a given length l than in the same length of wave in free space, so the electrical length of a transmission line is longer than the electrical length of a wave of the same frequency in free space {{Equation box 1 |indent =: |cellpadding = 0 |border = 2 |border colour = black |background colour = transparent |equation = \;G = {l \over \lambda} = {l \over \lambda_\text{0}\mathit{VF}} = {lf \over c\mathit{VF}}\; }} v(x, t) = V_\text{p} \cos(\omega t - \beta x) where V_\text{p} is the peak voltage along the line \omega = 2\pi f = 2\pi/T is the angular frequency of the alternating current in radians per second \beta = 2\pi/\lambda is the wavenumber, equal to the number of radians of the wave in one meter x is the distance along the line t is time In a matched transmission line, the current is in phase with the voltage, and their ratio is the characteristic impedance Z_\text{0} of the line i(x, t) = {v(x, t) \over Z_\text{0}} = {V_\text{p} \over Z_\text{0}} \cos(\omega t - \beta x) = {V_\text{p} \over Z_\text{0}} \cos \omega(t - x/\mathit{VF} c) showing the standing waves of voltage (red) and current (blue) on the antenna.

The antenna is resonant at the frequency at which the electrical length is approximately equal to \lambda/2 = c/2f An important class of radio antenna is the thin element antenna in which the radiating elements are conductive wires or rods. These include monopole antennas and dipole antennas, as well as antennas based on them such as the whip antenna, T antenna, mast radiator, Yagi, log periodic, and turnstile antennas.

These are resonant antennas, in which the radio frequency electric currents travel back and forth in the antenna conductors, reflecting from the ends. If the antenna rods are not too thick (have a large enough length to diameter ratio), the current along them is close to a sine wave, so the concept of electrical length also applies to these. The current is in the form of two oppositely directed sinusoidal traveling waves which reflect from the ends, which interfere to form standing waves.

The electrical length of an antenna, like a transmission line, is its length in wavelengths of the current on the antenna at the operating frequency. An antenna's resonant frequency, radiation pattern, and driving point impedance depend not on its physical length but on its electrical length. A thin antenna element is resonant at frequencies at which the standing current wave has a node (zero) at the ends (and in monopoles an antinode (maximum) at the ground plane).

A dipole antenna is resonant at frequencies at which its electrical length is a half wavelength ( \lambda/2, \phi = 180^\circ \;\text{or}\; \pi \;\text{radians} ) or a multiple of it. A monopole antenna is resonant at frequencies at which its electrical length is a quarter wavelength ( \lambda/4, \phi = 90^\circ \;\text{or}\; \pi/2 \;\text{radians} ) or a multiple of it. Resonant frequency is important because at frequencies at which the antenna is resonant the input impedance it presents to its feedline is purely resistive.

If the resistance of the antenna is matched to the characteristic resistance of the feedline, it absorbs all the power supplied to it, while at other frequencies it has reactance and reflects some power back down the line toward the transmitter, causing standing waves (high SWR) on the feedline. Since only a portion of the power is radiated this causes inefficiency, and can possibly overheat the line or transmitter.

Therefore, transmitting antennas are usually designed to be resonant at the transmitting frequency; and if they cannot be made the right length they are electrically lengthened or shortened to be resonant (see below). {l_\text{1} \over l_\text{2}} = {\lambda_\text{1} \over \lambda_\text{2}} = {f_\text{2} \over f_\text{1}} This means the length of antenna required for a given antenna gain scales with the wavelength (inversely with the frequency), or equivalently the aperture scales with the square of the wavelength.

Evidence and sources

The field of electromagnetics is the study of electric fields, magnetic fields, electric charge, electric currents and electromagnetic waves. Classic electromagnetism is based on the solution of Maxwell's equations. These equations are mathematically difficult to solve in all generality, so approximate methods have been developed that apply to situations in which the electrical length of the apparatus is very short ( G \ll 1 ) or very long ( G \gg 1 ).

Electromagnetics is divided into three regimes or fields of study depending on the electrical length of the apparatus, that is the physical length l of the apparatus compared to the wavelength \lambda = c/f of the waves: Completely different apparatus is used to conduct and process electromagnetic waves in these different wavelength ranges \lambda \gg l Circuit theory: When the wavelength of the electrical oscillations is much larger than the physical size of the circuit ( G \ll 1 ), say \lambda > 50l , the action occurs in the near field.

The phase of the oscillations and therefore the current and voltage can be approximated as constant along the length of connecting wires. Also little energy is radiated in the form of electromagnetic waves, the power radiated by a conductor as an antenna is proportional to the electrical length squared (l/\lambda)^2 = G^2 . So the electrical energy remains in the wires and components as quasistatic near-field electric and magnetic fields.

Therefore, the approximation of the lumped element model can be used, and electric currents oscillating at these frequencies can be processed by electric circuits consisting of lumped circuit elements such as resistors, capacitors, inductors, transformers, transistors, and integrated circuits linked by ordinary wires.

Mathematically Maxwell's equations reduce to circuit theory (Kirchhoff's circuit laws). \lambda \approx l , Distributed-element model (microwave theory): When the wavelength of the waves is of the same order of magnitude as the size of the equipment ( G \approx 1 ), as it is in the microwave part of the spectrum, full solutions of Maxwell's equations must be used. At these frequencies, wires are replaced by transmission lines and waveguide and lumped elements are replaced by resonant stubs, irises, and cavity resonators.

Often only a single mode (wave pattern) is propagating through the apparatus, which simplifies the mathematics. A modification of circuit theory called the distributed-element model can often be used, in which extended objects are regarded as electrical circuits with capacitance, inductance and resistance distributed along their length.

A graphical aid called the Smith chart is often used to analyze transmission lines. \lambda \ll l , Optics: When the wavelength of the electromagnetic wave is much smaller than the physical size of the equipment that manipulates it ( G \gg 1 ), say \lambda , most of the path of the waves is in the far field. In the far field, the electric and magnetic fields cannot be separated but propagate together as an electromagnetic wave.

Unlike in the case of microwaves, unless coherent light sources like lasers are used, the number of modes propagating is usually large.

Since little of the energy is stored in the quasistatic (induction) electric or magnetic fields at the surface boundaries between media (called evanescent fields in optics), the concepts of voltage, current, capacitance, and inductance have little meaning and are not used, and the medium is characterized by its index of refraction \nu = c/v_\text{p} = \sqrt{\epsilon_\text{r}\mu_\text{r}} , absorption, permittivity \epsilon , permeability \mu , and dispersion.

At these frequencies electromagnetic waves are manipulated by optical elements such as lenses, mirrors, prisms, optical filters and diffraction gratings. Maxwell's equations can be approximated by the equations of geometrical optics or physical optics. Historically, electric circuit theory and optics developed as separate branches of physics until at the end of the 19th century James Clerk Maxwell's electromagnetic theory and Heinrich Hertz's discovery that light was electromagnetic waves unified these fields as branches of electromagnetism.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1320194766 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001320194766 · captured 1762151732.0 · version history

Cite this page as: encyclopegia.org, “Electrical length”, snapshot enwiki-001320194766. https://encyclopegia.org/a/electrical-length

Sources cited in this revision

26 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.