Lesson plan

Electrical length

In electrical engineering, electrical length is a dimensionless parameter equal to the physical length of an electrical conductor such as a cable or wire, divided by the wavelength of alternating current at a given frequency traveling through the conductor. In other words, it is the length of the conductor measured in wavelengths. It can alternately be expressed as an angle, in radians or degrees, equal to the phase shift the alternating current experiences traveling through the conductor. Electrical length is defined for a conductor operating at a specific frequency or narrow band of frequencies. It varies according to the construction of the cable, so different cables of the same length operating at the same frequency can have different electrical lengths. A conductor is called electrically long if it has an electrical length much greater than one (i.e. it is much longer than the wavelength of the alternating current passing through it), and electrically short if it is much shorter than a wavelength. Electrical lengthening and electrical shortening mean adding reactance (capacitance or inductance) to an antenna or conductor to increase or decrease its electrical length, usually for the purpose of making it resonant at a different resonant frequency.…

Back to article

Article summary

In electrical engineering, electrical length is a dimensionless parameter equal to the physical length of an electrical conductor such as a cable or wire, divided by the wavelength of alternating current at a given frequency traveling through the conductor. In other words, it is the length of the conductor measured in wavelengths. It can alternately be expressed as an angle, in radians or degrees, equal to the phase shift the alternating current experiences traveling through the conductor. Electrical length is defined for a conductor operating at a specific frequency or narrow band of frequencies. It varies according to the construction of the cable, so different cables of the same length operating at the same frequency can have different electrical lengths. A conductor is called electrically long if it has an electrical length much greater than one (i.e. it is much longer than the wavelength of the alternating current passing through it), and electrically short if it is much shorter than a wavelength. Electrical lengthening and electrical shortening mean adding reactance (capacitance or inductance) to an antenna or conductor to increase or decrease its electrical length, usually for the purpose of making it resonant at a different resonant frequency.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.