Electromagnetic testing

Electromagnetic testing (ET), as a form of nondestructive testing, is the process of inducing electric currents or magnetic fields or both inside a test object and observing the electromagnetic response.

Uses your system voice; voice and rate in settings.

≈ 3 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Electromagnetic testing (ET), as a form of nondestructive testing, is the process of inducing electric currents or magnetic fields or both inside a test object and observing the electromagnetic response. If the test is set up properly, a defect inside the test object creates a measurable response.

The term "electromagnetic testing" is often intended to mean simply eddy-current testing (ECT). However, with an expanding number of electromagnetic and magnetic test methods, "electromagnetic testing" is more often used to mean the whole class of electromagnetic test methods, of which eddy-current testing is just one. also useful for the testing of drill pipes.

Common methods

edit edit source
  • Eddy-current testing (ECT) is used to detect near-surface cracks and corrosion in metallic objects such as tubes and aircraft fuselage and structures. ECT is more commonly applied to nonferromagnetic materials, since in ferromagnetic materials the depth of penetration is relatively small.
  • Remote field testing (RFT) is used for nondestructive testing (NDT) of steel tubes and pipes.
  • Magnetic flux leakage testing (MFL) is also used for nondestructive testing (NDT) of steel tubes and pipes. At present RFT is more commonly used in small diameter tubes and MFL in larger diameter pipes over long travel distances.
  • Wire rope testing is MFL applied to steel cables, to detect broken strands of wire.
  • Magnetic particle inspection (MT or MPI) is a form of MFL where small magnetic particles in the form of a powder or liquid are sprayed on the magnetized steel test object and gather at surface-breaking cracks.
  • Alternating current field measurement (ACFM) is similar to eddy current applied to steel. Its most common application is to detect and size cracks in welds.[1] from the company that developed it.
  • Pulsed eddy current[2] enables the detection of large-volume metal loss in steel objects from a considerable stand-off, allowing steel pipes to be tested without removing insulation.

See also

edit edit source

References

edit edit source
  1. ^ "Description". Archived from the original on 2006-05-28. Retrieved 2006-08-06. Wikipedia revision 1155272128, retrieved 2026-11-19
  2. ^ "Pulsed Eddy Current in Corrosion Detection". Wikipedia revision 1155272128, retrieved 2026-11-19

Text derived from https://en.wikipedia.org/w/index.php?oldid=1155272128 under CC BY-SA 4.0; modifications have been made.

Words in each sectionCommon methodsCommon methodsCommon methods: 211 words211See alsoSee alsoSee also: 5 words5
Words in each section. Measured from the stored article body; sections below the minimum are not plotted.

Provenance

snapshot enwiki-001155272128 · captured 2023-05-17 · ledger · version history

Cite this page as: encyclopegia.org, “Electromagnetic testing”, snapshot enwiki-001155272128. https://encyclopegia.org/a/electromagnetic-testing