Fastran

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Fastran is a computer program for calculating the rate of fatigue crack growth by combining crack growth equations and a simulation of the plasticity at the crack tip. Fastran models accelerations and retardation and other variable amplitude loading effects in crack growth using a crack closure model. The program uses a strip yield model of the crack tip that was first proposed by D. S. Dugdale to calculate the size of the plastic zone ahead of a crack tip. A series of elastic-perfectly plastic strips (originally 30 strips were used) that model the region both ahead and behind the crack tip is used to keep track of the plasticity produced at the crack tip. As the crack grows, the strips are cut and leave a region of raised plastic material in the crack wake that prevents the complete closure of a crack. This profile of the crack is used to calculate the stress intensity factor level K_\text{op} at which the crack tip is fully open. The effective stress intensity factor range is then : \Delta K_\text{eff} = K_\text{max} - \text{max}(K_\text{op}, K_\text{min}) which allows the rate of growth for the loading cycle to be obtained from the crack growth equation. The rate of crack growth is then calculated from : {da \over dN} = f(\Delta K_\text{eff})

Fastran is a computer program for calculating the rate of fatigue crack growth by combining crack growth equations and a simulation of the plasticity at the crack tip. Fastran models accelerations and retardation and other variable amplitude loading effects in crack growth using a crack closure model. The program uses a strip yield model of the crack tip that was first proposed by D. S. Dugdale to calculate the size of the plastic zone ahead of a crack tip. A series of elastic-perfectly plastic strips (originally 30 strips were used) that model the region both ahead and behind the crack tip is used to keep track of the plasticity produced at the crack tip. As the crack grows, the strips are cut and leave a region of raised plastic material in the crack wake that prevents the complete closure of a crack. This profile of the crack is used to calculate the stress intensity factor level K_\text{op} at which the crack tip is fully open. The effective stress intensity factor range is then \Delta K_\text{eff} = K_\text{max} - \text{max}(K_\text{op}, K_\text{min}) which allows the rate of growth for the loading cycle to be obtained from the crack growth equation. The rate of crack growth is then calculated from {da \over dN} = f(\Delta K_\text{eff}) K = \beta \sigma \sqrt{\pi a} where \sigma is the applied far field stress and a is the crack length. The loading sequence is given as a file of sequential turning points that represent the loading sequence. This in combination with a load factor is used to supply the far-field stress of the given geometry. The load sequence is converted into a series of individual load cycles by a method known as rainflow on the fly which is a modified form of the standard rainflow-counting algorithm. The closure model has also been used to explain the increase rate of growth seen with small cracks known as the small crack effect.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1331924043 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

1 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.