Lesson plan

Fastran

Fastran is a computer program for calculating the rate of fatigue crack growth by combining crack growth equations and a simulation of the plasticity at the crack tip. Fastran models accelerations and retardation and other variable amplitude loading effects in crack growth using a crack closure model. The program uses a strip yield model of the crack tip that was first proposed by D. S. Dugdale to calculate the size of the plastic zone ahead of a crack tip. A series of elastic-perfectly plastic strips (originally 30 strips were used) that model the region both ahead and behind the crack tip is used to keep track of the plasticity produced at the crack tip. As the crack grows, the strips are cut and leave a region of raised plastic material in the crack wake that prevents the complete closure of a crack. This profile of the crack is used to calculate the stress intensity factor level K_\text{op} at which the crack tip is fully open. The effective stress intensity factor range is then : \Delta K_\text{eff} = K_\text{max} - \text{max}(K_\text{op}, K_\text{min}) which allows the rate of growth for the loading cycle to be obtained from the crack growth equation. The rate of crack growth is then calculated from : {da \over dN} = f(\Delta K_\text{eff})

Back to article

Article summary

Fastran is a computer program for calculating the rate of fatigue crack growth by combining crack growth equations and a simulation of the plasticity at the crack tip. Fastran models accelerations and retardation and other variable amplitude loading effects in crack growth using a crack closure model. The program uses a strip yield model of the crack tip that was first proposed by D. S. Dugdale to calculate the size of the plastic zone ahead of a crack tip. A series of elastic-perfectly plastic strips (originally 30 strips were used) that model the region both ahead and behind the crack tip is used to keep track of the plasticity produced at the crack tip. As the crack grows, the strips are cut and leave a region of raised plastic material in the crack wake that prevents the complete closure of a crack. This profile of the crack is used to calculate the stress intensity factor level K_\text{op} at which the crack tip is fully open. The effective stress intensity factor range is then : \Delta K_\text{eff} = K_\text{max} - \text{max}(K_\text{op}, K_\text{min}) which allows the rate of growth for the loading cycle to be obtained from the crack growth equation. The rate of crack growth is then calculated from : {da \over dN} = f(\Delta K_\text{eff})

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.