Flame stretch

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In combustion, flame stretch ( K ) is a quantity which measures the amount of stretch of the flame surface due to curvature and due to the outer velocity field strain. The early concept of flame stretch was introduced by Karlovitz in 1953, although the correct definition was introduced by Forman A. Williams in 1975. George H. Markstein studied flame stretch by treating the flame surface as a hydrodynamic discontinuity (known as flame front). The flame stretch is also discussed by Bernard Lewis and Guenther von Elbe in their book. All these discussions treated flame stretch as an effect of flow velocity gradients. The stretch can be found even if there is no velocity gradient, but due to the flame curvature. So, the definition required a more general formulation and its precise definition is given as the ratio of rate of change of flame surface area to the area itself : K = \frac{1}{A}\frac{dA}{dt}. When K>0 , the flame is stretched, otherwise compressed. Sometimes the flame stretch is defined as non-dimensional quantity : \tilde K = \frac{\delta_L}{S_L} \frac{1}{A}\frac{dA}{dt} where \delta_L is the laminar flame thickness and S_L is the laminar propagation speed of unstretched premixed flame. The formula for flame stretch was first derived by John D. Buckmaster in 1979.

In combustion, flame stretch ( K ) is a quantity which measures the amount of stretch of the flame surface due to curvature and due to the outer velocity field strain. The early concept of flame stretch was introduced by Karlovitz in 1953, although the correct definition was introduced by Forman A. Williams in 1975. George H. Markstein studied flame stretch by treating the flame surface as a hydrodynamic discontinuity (known as flame front). The flame stretch is also discussed by Bernard Lewis and Guenther von Elbe in their book. All these discussions treated flame stretch as an effect of flow velocity gradients. The stretch can be found even if there is no velocity gradient, but due to the flame curvature. So, the definition required a more general formulation and its precise definition is given as the ratio of rate of change of flame surface area to the area itself K = \frac{1}{A}\frac{dA}{dt}. When K>0 , the flame is stretched, otherwise compressed. Sometimes the flame stretch is defined as non-dimensional quantity \tilde K = \frac{\delta_L}{S_L} \frac{1}{A}\frac{dA}{dt} where \delta_L is the laminar flame thickness and S_L is the laminar propagation speed of unstretched premixed flame. The formula for flame stretch was first derived by John D. Buckmaster in 1979.

See also

Markstein number Matalon–Matkowsky–Clavin–Joulin theory G equation

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1236548020 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001236548020 · captured 1721890284.0 · version history

Cite this page as: encyclopegia.org, “Flame stretch”, snapshot enwiki-001236548020. https://encyclopegia.org/a/flame-stretch

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.