Lesson plan
Flame stretch
In combustion, flame stretch ( K ) is a quantity which measures the amount of stretch of the flame surface due to curvature and due to the outer velocity field strain. The early concept of flame stretch was introduced by Karlovitz in 1953, although the correct definition was introduced by Forman A. Williams in 1975. George H. Markstein studied flame stretch by treating the flame surface as a hydrodynamic discontinuity (known as flame front). The flame stretch is also discussed by Bernard Lewis and Guenther von Elbe in their book. All these discussions treated flame stretch as an effect of flow velocity gradients. The stretch can be found even if there is no velocity gradient, but due to the flame curvature. So, the definition required a more general formulation and its precise definition is given as the ratio of rate of change of flame surface area to the area itself : K = \frac{1}{A}\frac{dA}{dt}. When K>0 , the flame is stretched, otherwise compressed. Sometimes the flame stretch is defined as non-dimensional quantity : \tilde K = \frac{\delta_L}{S_L} \frac{1}{A}\frac{dA}{dt} where \delta_L is the laminar flame thickness and S_L is the laminar propagation speed of unstretched premixed flame. The formula for flame stretch was first derived by John D. Buckmaster in 1979.
Article summary
In combustion, flame stretch ( K ) is a quantity which measures the amount of stretch of the flame surface due to curvature and due to the outer velocity field strain. The early concept of flame stretch was introduced by Karlovitz in 1953, although the correct definition was introduced by Forman A. Williams in 1975. George H. Markstein studied flame stretch by treating the flame surface as a hydrodynamic discontinuity (known as flame front). The flame stretch is also discussed by Bernard Lewis and Guenther von Elbe in their book. All these discussions treated flame stretch as an effect of flow velocity gradients. The stretch can be found even if there is no velocity gradient, but due to the flame curvature. So, the definition required a more general formulation and its precise definition is given as the ratio of rate of change of flame surface area to the area itself : K = \frac{1}{A}\frac{dA}{dt}. When K>0 , the flame is stretched, otherwise compressed. Sometimes the flame stretch is defined as non-dimensional quantity : \tilde K = \frac{\delta_L}{S_L} \frac{1}{A}\frac{dA}{dt} where \delta_L is the laminar flame thickness and S_L is the laminar propagation speed of unstretched premixed flame. The formula for flame stretch was first derived by John D. Buckmaster in 1979.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.