Flax mill

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

at Holbeck, Leeds, probably circa 1843 Flax mills are mills which process flax. The earliest mills were developed for spinning yarn for the linen industry. John Kendrew (an optician) and Thomas Porthouse (a clockmaker), both of Darlington developed the process from Richard Arkwright's water frame, and patented it in 1787. The first machine was set up in Low Mill on the River Skerne at Darlington, which Kendrew used to grind glass. They then each set up a mill of their own, Kendrew near Haughton-le-Skerne and Porthouse near Coatham Mundeville, both on the same river. They also granted permits, enabling others to build similar mills, including in northeast Scotland, where early mills included those in Douglastown, Bervie and Dundee. Others were built in Leeds. Matthew Murray moved from Darlington to set up a mill at Adel near Leeds, where he built an improved spinning machine for John Marshall. In 1791, Marshall built another mill in Holbeck near Leeds. Murray later became a noted textile engineer as a partner in Fenton, Murray and Wood. Ditherington Flax Mill in Shrewsbury, built in 1797, is the world's first iron-framed building, and hence a forerunner of all skyscrapers. In 1805, Malleny Mill was built on the eastern edge of Balerno to process Flax. The last flax mill that was operational in the United Kingdom was located in Gourdon, Aberdeenshire, and closed on 30 May 1997.

at Holbeck, Leeds, probably circa 1843]] Flax mills are mills which process flax. The earliest mills were developed for spinning yarn for the linen industry. John Kendrew (an optician) and Thomas Porthouse (a clockmaker), both of Darlington developed the process from Richard Arkwright's water frame, and patented it in 1787. The first machine was set up in Low Mill on the River Skerne at Darlington, which Kendrew used to grind glass. They then each set up a mill of their own, Kendrew near Haughton-le-Skerne and Porthouse near Coatham Mundeville, both on the same river. They also granted permits, enabling others to build similar mills, including in northeast Scotland, where early mills included those in Douglastown, Bervie and Dundee. Others were built in Leeds. Matthew Murray moved from Darlington to set up a mill at Adel near Leeds, where he built an improved spinning machine for John Marshall. In 1791, Marshall built another mill in Holbeck near Leeds. Murray later became a noted textile engineer as a partner in Fenton, Murray and Wood. Ditherington Flax Mill in Shrewsbury, built in 1797, is the world's first iron-framed building, and hence a forerunner of all skyscrapers. In 1805, Malleny Mill was built on the eastern edge of Balerno to process Flax. The last flax mill that was operational in the United Kingdom was located in Gourdon, Aberdeenshire, and closed on 30 May 1997.

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1335106243 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

1 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.