Lesson plan

Flax mill

at Holbeck, Leeds, probably circa 1843 Flax mills are mills which process flax. The earliest mills were developed for spinning yarn for the linen industry. John Kendrew (an optician) and Thomas Porthouse (a clockmaker), both of Darlington developed the process from Richard Arkwright's water frame, and patented it in 1787. The first machine was set up in Low Mill on the River Skerne at Darlington, which Kendrew used to grind glass. They then each set up a mill of their own, Kendrew near Haughton-le-Skerne and Porthouse near Coatham Mundeville, both on the same river. They also granted permits, enabling others to build similar mills, including in northeast Scotland, where early mills included those in Douglastown, Bervie and Dundee. Others were built in Leeds. Matthew Murray moved from Darlington to set up a mill at Adel near Leeds, where he built an improved spinning machine for John Marshall. In 1791, Marshall built another mill in Holbeck near Leeds. Murray later became a noted textile engineer as a partner in Fenton, Murray and Wood. Ditherington Flax Mill in Shrewsbury, built in 1797, is the world's first iron-framed building, and hence a forerunner of all skyscrapers. In 1805, Malleny Mill was built on the eastern edge of Balerno to process Flax. The last flax mill that was operational in the United Kingdom was located in Gourdon, Aberdeenshire, and closed on 30 May 1997.

Back to article

Article summary

at Holbeck, Leeds, probably circa 1843 Flax mills are mills which process flax. The earliest mills were developed for spinning yarn for the linen industry. John Kendrew (an optician) and Thomas Porthouse (a clockmaker), both of Darlington developed the process from Richard Arkwright's water frame, and patented it in 1787. The first machine was set up in Low Mill on the River Skerne at Darlington, which Kendrew used to grind glass. They then each set up a mill of their own, Kendrew near Haughton-le-Skerne and Porthouse near Coatham Mundeville, both on the same river. They also granted permits, enabling others to build similar mills, including in northeast Scotland, where early mills included those in Douglastown, Bervie and Dundee. Others were built in Leeds. Matthew Murray moved from Darlington to set up a mill at Adel near Leeds, where he built an improved spinning machine for John Marshall. In 1791, Marshall built another mill in Holbeck near Leeds. Murray later became a noted textile engineer as a partner in Fenton, Murray and Wood. Ditherington Flax Mill in Shrewsbury, built in 1797, is the world's first iron-framed building, and hence a forerunner of all skyscrapers. In 1805, Malleny Mill was built on the eastern edge of Balerno to process Flax. The last flax mill that was operational in the United Kingdom was located in Gourdon, Aberdeenshire, and closed on 30 May 1997.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.