Flushing hydrant

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A flushing hydrant is a hydrant that is used for flushing a water line of silt, rust, debris, or stagnant water. Many water utilities use standard fire hydrants for flushing their lines. Specialized flushing hydrants are often smaller and less expensive than a fire hydrant to reduce cost where fire fighting use is not needed or practical. Many flushing hydrants are "unidirectional": they only have one outlet, in contrast to fire hydrants, which normally have two or three. Flushing hydrants are commonly installed at the end of dead-end water lines.

A flushing hydrant is a hydrant that is used for flushing a water line of silt, rust, debris, or stagnant water. Many water utilities use standard fire hydrants for flushing their lines. Specialized flushing hydrants are often smaller and less expensive than a fire hydrant to reduce cost where fire fighting use is not needed or practical. Many flushing hydrants are "unidirectional": they only have one outlet, in contrast to fire hydrants, which normally have two or three. Flushing hydrants are commonly installed at the end of dead-end water lines.

See also

Fire hydrant

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1326760953 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

Extracted from the cited revision's reference blocks; absent citations are not invented.