Lesson plan

Flushing hydrant

A flushing hydrant is a hydrant that is used for flushing a water line of silt, rust, debris, or stagnant water. Many water utilities use standard fire hydrants for flushing their lines. Specialized flushing hydrants are often smaller and less expensive than a fire hydrant to reduce cost where fire fighting use is not needed or practical. Many flushing hydrants are "unidirectional": they only have one outlet, in contrast to fire hydrants, which normally have two or three. Flushing hydrants are commonly installed at the end of dead-end water lines.

Back to article

Article summary

A flushing hydrant is a hydrant that is used for flushing a water line of silt, rust, debris, or stagnant water. Many water utilities use standard fire hydrants for flushing their lines. Specialized flushing hydrants are often smaller and less expensive than a fire hydrant to reduce cost where fire fighting use is not needed or practical. Many flushing hydrants are "unidirectional": they only have one outlet, in contrast to fire hydrants, which normally have two or three. Flushing hydrants are commonly installed at the end of dead-end water lines.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.