Fusion power

.

Uses your system voice; voice and rate in settings.

≈ 11 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Fusion power is a potential method of electric power generation from heat released by nuclear fusion reactions. In fusion, two light atomic nuclei combine to form a heavier nucleus and release energy. Devices that use this process are known as fusion reactors.

Research on fusion reactors began in the 1940s. As of 2025, the National Ignition Facility (NIF) in the United States is the only laboratory to have demonstrated a fusion energy gain factor above one, but efficiencies orders of magnitude higher are required to reach engineering breakeven (a net electricity-producing plant) or economic breakeven (where the net electricity pays for the plant's whole-life cost).

Thermonuclear fusion reactions require fuel in a plasma state and a confined environment with high temperature, pressure, and sufficient confinement time. The relationship between these parameters is expressed by the Lawson criterion. In stars, gravity provides the conditions for fusing hydrogen isotopes.

Experimental reactors use deuterium and tritium, heavier isotopes of hydrogen, in a process known as DT fusion. This reaction forms a helium nucleus and an energetic neutron. Fusion fuel is extremely energy-dense, but tritium is scarce on Earth and decays with a half-life of about 12.3 years.

Future reactors plan to use lithium breeding blankets that generate tritium when exposed to neutron radiation. Fusion offers advantages compared with nuclear fission. It produces minimal high-level radioactive waste and involves lower inherent safety risks.

However, the process generates intense neutron radiation that gradually damages the inner walls of a reactor. Achieving sustained energy gain beyond breakeven and converting it efficiently into electricity remain major technical challenges. Research focuses mainly on two methods: magnetic confinement fusion (MCF) and inertial confinement fusion (ICF).

MCF devices use magnetic fields to contain plasma. Early concepts included the z-pinch, stellarator, and magnetic mirror, with the tokamak design becoming dominant after Soviet experiments in the 1960s. ICF compresses and heats small fuel pellets using high-energy lasers, developed primarily since the 1970s.

The largest active projects are ITER in France and the National Ignition Facility in the United States. Commercial and academic teams are also studying alternatives such as magnetized target fusion and modern stellarator designs.

P_\text{fusion} = n_A n_B \langle \sigma v_{A,B} \rangle E_\text{fusion} where: P_\text{fusion} is the energy made by fusion, per time and volume n is the number density of species A or B, of the particles in the volume \langle \sigma v_{A,B} \rangle is the reactivity of that reaction, defined as the average of the cross section σ over all the velocities of the two species v E_\text{fusion} is the energy released by that fusion reaction. P_\text{out} = \eta_\text{capture}\left(P_\text{fusion} - P_\text{conduction} - P_\text{radiation}\right) where: P_\text{out} is the net power from fusion \eta_\text{capture} is the efficiency of capturing the output of the fusion P_\text{fusion} is the rate of energy generated by the fusion reactions P_\text{conduction} is the conduction losses as energetic mass leaves the plasma P_\text{radiation} is the radiation losses as energy leaves as light and neutron flux.

The rate of fusion, and thus P fusion , depends on the temperature and density of the plasma. The plasma loses energy through conduction and radiation. Conduction occurs when ions, electrons, or neutrals impact other substances, typically a surface of the device, and transfer a portion of their kinetic energy to the other atoms.

The rate of conduction is also based on the temperature and density. Radiation is energy that leaves the cloud as light. Radiation also increases with temperature as well as the mass of the ions.

Fusion power systems must operate in a region where the rate of fusion is higher than the losses. Fusion power commonly proposes the use of deuterium as fuel, and many current designs also use lithium.

Assuming a fusion energy output equal to the 1995 global power output of about 100 EJ/yr (= 1 × 10 20 J/yr) and that this does not increase in the future, which is unlikely, then known current lithium reserves would last 3000 years. On the other hand, lithium from seawater would last 60 million years, and, together with utilizing a more complicated fusion process using only deuterium, would provide fuel for 150 billion years.

Historic investment

The European Union spent almost through the 1990s. ITER represents an investment of over twenty billion dollars, and possibly tens of billions more, including in kind contributions.

Under the European Union's Sixth Framework Programme, nuclear fusion research received (in addition to ITER funding), compared with for sustainable energy research, putting research into fusion power well ahead of that of any single rival technology. The United States Department of Energy has allocated $US367M–$US671M every year since 2010, peaking in 2020, with plans to reduce investment to $US425M in its FY2021 Budget Request.

About a quarter of this budget is directed to support ITER. The size of the investments and time lines meant that fusion research was traditionally almost exclusively publicly funded. However, starting in the 2010s, the promise of commercializing a paradigm-changing low-carbon energy source began to attract a raft of companies and investors.

Over two dozen start-up companies attracted over one billion dollars from roughly 2000 to 2020, mainly from 2015, and a further three billion in funding and milestone related commitments in 2021, with investors including Jeff Bezos, Peter Thiel, and Bill Gates, as well as institutional investors including Legal & General, and energy companies including Equinor, Eni, Chevron, and the Chinese ENN Group. In 2021, Commonwealth Fusion Systems (CFS) obtained $1.8 billion in scale-up funding, and Helion Energy obtained a half-billion dollars with an additional $1.7 billion contingent on meeting milestones.

Scenarios developed in the 2000s and early 2010s discussed the effects of the commercialization of fusion power on the future of human civilization. Using nuclear fission as a guide, these saw ITER and later DEMO as bringing online the first commercial reactors around 2050 and a rapid expansion after mid-century.

Some scenarios emphasized "fusion nuclear science facilities" as a step beyond ITER. However, the economic obstacles to tokamak-based fusion power remain immense, requiring investment to fund prototype tokamak reactors and development of new supply chains, a problem which will affect any kind of fusion reactor.

Tokamak designs appear to be labour-intensive, while the commercialization risk of alternatives like inertial fusion energy is high due to the lack of government resources. Scenarios since 2010 note computing and material science advances enabling multi-phase national or cost-sharing "Fusion Pilot Plants" (FPPs) along various technology pathways, such as the UK Spherical Tokamak for Energy Production, within the 2030–2040 time frame.

Notably, in June 2021, General Fusion announced it would accept the UK government's offer to host the world's first substantial public-private partnership fusion demonstration plant, at Culham Centre for Fusion Energy. The plant will be constructed from 2022 to 2025 and is intended to lead the way for commercial pilot plants in the late 2020s.

The plant will be 70% of full scale and is expected to attain a stable plasma of 150 million degrees. Further UK plans include a development site near Retford.

In the United States, cost-sharing public-private partnership FPPs appear likely, and in 2022 the DOE announced a new Milestone-Based Fusion Development Program as the centerpiece of its Bold Decadal Vision for Commercial Fusion Energy, which envisages private sector-led teams delivering FPP pre-conceptual designs, defining technology roadmaps, and pursuing the R&D necessary to resolve critical-path scientific and technical issues towards an FPP design. Compact reactor technology based on such demonstration plants may enable commercialization via a fleet approach from the 2030s if early markets can be located.

Relative costs

The widespread adoption of non-nuclear renewable energy has transformed the energy landscape. Such renewables are projected to supply 74% of global energy by 2050. The steady fall of renewable energy prices challenges the economic competitiveness of fusion power.

Some economists suggest fusion power is unlikely to match other renewable energy costs. Fusion plants are expected to face large start up and capital costs. Moreover, operation and maintenance are likely to be costly.

While the costs of the China Fusion Engineering Test Reactor are not well known, an EU DEMO fusion concept was projected to feature a levelized cost of energy (LCOE) of $121/MWh. Fuel costs are low, but economists suggest that the energy cost for a one-gigawatt plant would increase by $16.5 per MWh for every $1 billion increase in the capital investment in construction.

There is also the risk that easily obtained lithium will be used up making batteries. Obtaining it from seawater would be very costly and might require more energy than the energy that would be generated. In contrast, renewable levelized cost of energy estimates are substantially lower.

For instance, the 2019 levelized cost of energy of solar energy was estimated to be $40–46/MWh, on shore wind was estimated at $29–56/MWh, and offshore wind was approximately $92/MWh.

Prospects

However, fusion power may still have a role filling energy gaps left by renewables, depending on how administration priorities for energy and environmental justice influence the market. In the 2020s, socioeconomic studies of fusion that began to consider these factors emerged, and in 2022 EUROFusion launched its Socio-Economic Studies and Prospective Research and Development strands to investigate how such factors might affect commercialization pathways and timetables.

Similarly, in April 2023 Japan announced a national strategy to industrialise fusion. Thus, fusion power may work in tandem with other renewable energy sources rather than becoming the primary energy source.

In some applications, fusion power could provide the base load, especially if including integrated thermal storage and cogeneration and considering the potential for retrofitting coal plants.

Helium production

Deuterium–tritium fusion produces helium-4 as a by-product.

Future development

Claims of commercially viable fusion power being relatively imminent have often attracted ridicule within the scientific community. A common joke is that human-engineered fusion has always been promised as 30 years away since the concept was first discussed, or that it has been "20 years away for 50 years".

In 2024, Commonwealth Fusion Systems announced plans to build the world's first grid-scale commercial nuclear fusion power plant at the James River Industrial Center in Chesterfield County, Virginia, which is part of the Greater Richmond Region. The plant is designed to produce about 400 MW of electric power, and is intended to come online in the early 2030s.

In 2025, Helion Energy, a startup company backed by OpenAI, announced plans to build a fusion power plant in Malaga, Washington to supply power to Microsoft data centers by 2028. It will use extant grid infrastructure for the nearby Rock Island Dam hydroelectric plant.

In January 2026, Type One Energy announced plans to build a 350MWe fusion power plant using a stellarator fusion reactor. Nuttall, William J., Konishi, Satoshi, Takeda, Shutaro, and Webbe-Wood, David (2020). Commercialising Fusion Energy: How Small Businesses are Transforming Big Science.

IOP Publishing. .

Further reading

Oreskes, Naomi, "Fusion's False Promise: Despite a recent advance, nuclear fusion is not the solution to the climate crisis", Scientific American, vol. 328, no. 6 (June 2023), p. 86.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1378635800 under CC BY-SA 4.0; modifications have been made.

Words in each sectionHistoric investmentHistoric investmentHistoric investment: 575 words575Relative costsRelative costsRelative costs: 217 words217Future developmentFuture developmentFuture development: 198 words198ProspectsProspectsProspects: 123 words123Further readingFurther readingFurther reading: 54 words54Helium productionHelium productionHelium production: 8 words8
Words in each section. Measured from the stored article body; sections below the minimum are not plotted.

Provenance

snapshot enwiki-001378635800 · captured 2026-10-05 · ledger · version history

Cite this page as: encyclopegia.org, “Fusion power”, snapshot enwiki-001378635800. https://encyclopegia.org/a/fusion-power

Sources cited in this revision

34 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.