Lesson plan

Giga Press

The Giga Press program is a series of aluminium die casting machines manufactured for Tesla, initially by Idra Group in Italy. Idra presses were the largest high-pressure die casting machines in production as of 2020, with a clamping force of . Each machine weighs . Base specification Giga Press machines were included in Idra's catalogue in 2018. Tesla began using a custom Giga Press in late-2020 for integrated die-casting production of chassis parts for the Tesla Model Y. Shots of molten aluminium weighing are injected into the cold-chamber casting mold with a velocity of . The cycle time is ~80–90 seconds, allowing an initial output rate of 40‒45 completed castings per hour, or ~1,000 castings per day.

Back to article

Article summary

The Giga Press program is a series of aluminium die casting machines manufactured for Tesla, initially by Idra Group in Italy. Idra presses were the largest high-pressure die casting machines in production as of 2020, with a clamping force of . Each machine weighs . Base specification Giga Press machines were included in Idra's catalogue in 2018. Tesla began using a custom Giga Press in late-2020 for integrated die-casting production of chassis parts for the Tesla Model Y. Shots of molten aluminium weighing are injected into the cold-chamber casting mold with a velocity of . The cycle time is ~80–90 seconds, allowing an initial output rate of 40‒45 completed castings per hour, or ~1,000 castings per day.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.