Lesson plan

Ground (electricity)

In electrical engineering, ground or earth may refer to reference ground – a reference point in an electrical circuit from which voltages are measured, earth ground – an electrically neutral node that has a lot of available charges (e.g. the physical ground of Earth), or common ground – a common return path for electric current (also called neutral in electric power systems). Ground current or earth current is the current that flows through a reference ground, earth ground, or common ground. To ground or to earth an object is to electrically connect the object to a reference ground, earth ground, or common ground. Electrical circuits may be grounded for several reasons. A protective earth conductor (PE conductor) is a conductor that is used for electrical bonding, that is, connecting an electrical equipment from its exposed and conductive but normally unenergized part to common ground. If the conductor is a wire, it is also called ground wire or earth wire. Ground wire is often used for lower voltage systems and is often colored green, or green and yellow, per standard. Electrical bonding can protect users from electrical shock hazards. If internal insulation fails and the equipment is turned on, the exposed conductive parts may have dangerous voltages.…

Back to article

Article summary

In electrical engineering, ground or earth may refer to reference ground – a reference point in an electrical circuit from which voltages are measured, earth ground – an electrically neutral node that has a lot of available charges (e.g. the physical ground of Earth), or common ground – a common return path for electric current (also called neutral in electric power systems). Ground current or earth current is the current that flows through a reference ground, earth ground, or common ground. To ground or to earth an object is to electrically connect the object to a reference ground, earth ground, or common ground. Electrical circuits may be grounded for several reasons. A protective earth conductor (PE conductor) is a conductor that is used for electrical bonding, that is, connecting an electrical equipment from its exposed and conductive but normally unenergized part to common ground. If the conductor is a wire, it is also called ground wire or earth wire. Ground wire is often used for lower voltage systems and is often colored green, or green and yellow, per standard. Electrical bonding can protect users from electrical shock hazards. If internal insulation fails and the equipment is turned on, the exposed conductive parts may have dangerous voltages.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.