IBoot

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

iBoot is the stage 1 and stage 2 bootloader for iPhones, iPads, Apple silicon-based Macs, and the T2 chip in Intel-based Macs with such a chip. Compared with its predecessor, iBoot improves authentication performed in the boot chain. For Intel-based Macs with a T2 chip, the boot process starts by running code on the T2 chip from the boot ROM. That boot ROM loads and runs iBoot onto the T2 chip; iBoot loads the bridgeOS operating system onto the T2 chip and starts it; bridgeOS loads the UEFI firmware; UEFI firmware starts the main Intel processor and completes the Power-On Self Test process. The UEFI firmware loads boot.efi, which loads and starts the macOS kernel. For Intel-based Macs with a T2 chip, the UEFI firmware may be called iBoot UEFI. For iPhones, iPads, and Apple silicon-based Macs, the boot process starts by running the device's boot ROM, which is integrated into the device's SoC. On iPhones and iPads with A9 or earlier A-series processors, the boot ROM loads the (LLB), which is the stage 1 bootloader and loads iBoot, and LLB is stored on an EEPROM; on iPhones and iPads with A10 or later processors, as well as Apple silicon Macs, the boot ROM loads iBoot, and LLB and iBoot are stored on NAND flash or internal SSD, which is a NOR-less boot flow.…

iBoot is the stage 1 and stage 2 bootloader for iPhones, iPads, Apple silicon-based Macs, and the T2 chip in Intel-based Macs with such a chip. Compared with its predecessor, iBoot improves authentication performed in the boot chain. For Intel-based Macs with a T2 chip, the boot process starts by running code on the T2 chip from the boot ROM. That boot ROM loads and runs iBoot onto the T2 chip; iBoot loads the bridgeOS operating system onto the T2 chip and starts it; bridgeOS loads the UEFI firmware; UEFI firmware starts the main Intel processor and completes the Power-On Self Test process. The UEFI firmware loads boot.efi, which loads and starts the macOS kernel. For Intel-based Macs with a T2 chip, the UEFI firmware may be called iBoot UEFI. For iPhones, iPads, and Apple silicon-based Macs, the boot process starts by running the device's boot ROM, which is integrated into the device's SoC. On iPhones and iPads with A9 or earlier A-series processors, the boot ROM loads the (LLB), which is the stage 1 bootloader and loads iBoot, and LLB is stored on an EEPROM; on iPhones and iPads with A10 or later processors, as well as Apple silicon Macs, the boot ROM loads iBoot, and LLB and iBoot are stored on NAND flash or internal SSD, which is a NOR-less boot flow. If all goes well, iBoot will then proceed to load the iOS, iPadOS or macOS kernel as well as the rest of the operating system. If iBoot fails to load or fails to verify iOS, iPadOS or macOS, the bootloader jumps to DFU ( D evice F irmware U pdate) mode; otherwise it loads the remaining kernel modules. For arm64 devices with iBoot, it will "jump" to the kernelcache (the kernel itself wrapped in the Image4 format), and boot off of it. Once the kernel and all drivers necessary for booting are loaded, the boot loader starts the kernel's initialization procedure. At this point, enough drivers are loaded for the kernel to find the root device.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1341129073 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

18 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.