Lesson plan

IBoot

iBoot is the stage 1 and stage 2 bootloader for iPhones, iPads, Apple silicon-based Macs, and the T2 chip in Intel-based Macs with such a chip. Compared with its predecessor, iBoot improves authentication performed in the boot chain. For Intel-based Macs with a T2 chip, the boot process starts by running code on the T2 chip from the boot ROM. That boot ROM loads and runs iBoot onto the T2 chip; iBoot loads the bridgeOS operating system onto the T2 chip and starts it; bridgeOS loads the UEFI firmware; UEFI firmware starts the main Intel processor and completes the Power-On Self Test process. The UEFI firmware loads boot.efi, which loads and starts the macOS kernel. For Intel-based Macs with a T2 chip, the UEFI firmware may be called iBoot UEFI. For iPhones, iPads, and Apple silicon-based Macs, the boot process starts by running the device's boot ROM, which is integrated into the device's SoC. On iPhones and iPads with A9 or earlier A-series processors, the boot ROM loads the (LLB), which is the stage 1 bootloader and loads iBoot, and LLB is stored on an EEPROM; on iPhones and iPads with A10 or later processors, as well as Apple silicon Macs, the boot ROM loads iBoot, and LLB and iBoot are stored on NAND flash or internal SSD, which is a NOR-less boot flow.…

Back to article

Article summary

iBoot is the stage 1 and stage 2 bootloader for iPhones, iPads, Apple silicon-based Macs, and the T2 chip in Intel-based Macs with such a chip. Compared with its predecessor, iBoot improves authentication performed in the boot chain. For Intel-based Macs with a T2 chip, the boot process starts by running code on the T2 chip from the boot ROM. That boot ROM loads and runs iBoot onto the T2 chip; iBoot loads the bridgeOS operating system onto the T2 chip and starts it; bridgeOS loads the UEFI firmware; UEFI firmware starts the main Intel processor and completes the Power-On Self Test process. The UEFI firmware loads boot.efi, which loads and starts the macOS kernel. For Intel-based Macs with a T2 chip, the UEFI firmware may be called iBoot UEFI. For iPhones, iPads, and Apple silicon-based Macs, the boot process starts by running the device's boot ROM, which is integrated into the device's SoC. On iPhones and iPads with A9 or earlier A-series processors, the boot ROM loads the (LLB), which is the stage 1 bootloader and loads iBoot, and LLB is stored on an EEPROM; on iPhones and iPads with A10 or later processors, as well as Apple silicon Macs, the boot ROM loads iBoot, and LLB and iBoot are stored on NAND flash or internal SSD, which is a NOR-less boot flow.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.