LM13700

dual operational transconductance amplifier

Uses your system voice; voice and rate in settings.

Q6459004Snapshot

≈ 3 min read

Names in other languages

  • فارسیال ام ۱۳۷۰۰
  • EnglishLM13700
  • gaLM13700
  • РусскийLM13700

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

for an OTA has inverting (V in- ) and noninverting (V in+ ) inputs, power supply lines (V + and V − ), two biasing inputs (I abc and I bias ), and a single output current I out . The LM13700 is an integrated circuit (IC) containing two current-controlled operational transconductance amplifiers (OTA), each having differential inputs and a push-pull output.

Linearizing diodes at the input can optionally be used by applying a bias current into I to reduce distortion and allow increased input levels. The output bias can be programmed using an optional current into the I pin.

Two unconnected Darlington emitter follower output buffers capable of 20 mA each can be optionally connected to each OTA's output to complement the OTA's wide dynamic range. The bias currents (and hence the output DC levels) of the Darlington output buffers on the LM13700 are independent of the I pin (unlike those on the LM13600).

This may result in performance superior to that of the LM13600 in audio applications. This chip historically has been useful in audio electronics, especially in analog synthesizer circuits like voltage-controlled oscillators, voltage-controlled filters, and voltage-controlled amplifiers.

for an OTA has inverting (V in- ) and noninverting (V in+ ) inputs, power supply lines (V + and V − ), two biasing inputs (I abc and I bias ), and a single output current I out . The LM13700 is an integrated circuit (IC) containing two current-controlled operational transconductance amplifiers (OTA), each having differential inputs and a push-pull output.

Linearizing diodes at the input can optionally be used by applying a bias current into I to reduce distortion and allow increased input levels. The output bias can be programmed using an optional current into the I pin.

Two unconnected Darlington emitter follower output buffers capable of 20 mA each can be optionally connected to each OTA's output to complement the OTA's wide dynamic range. The bias currents (and hence the output DC levels) of the Darlington output buffers on the LM13700 are independent of the I pin (unlike those on the LM13600).

This may result in performance superior to that of the LM13600 in audio applications. This chip historically has been useful in audio electronics, especially in analog synthesizer circuits like voltage-controlled oscillators, voltage-controlled filters, and voltage-controlled amplifiers.

Distinction from op-amp

While both an OTA and an op-amp have a pair of differential voltage inputs and a single output, an OTA outputs a current rather than a voltage.

See also

Transconductance Operational amplifier Transconductance amplifier Current mirror

A Short Discussion of the Operational Transconductance Amplifier The LM13600/LM13700 Story Supplemental LM13700 Application Examples

Text derived from https://en.wikipedia.org/w/index.php?oldid=1374181404 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot lm13700-731438-cf1a578fc5ae307f · hash cf1a578fc5ae307f21b74b3f4d3969e7a99a149b1df27a47039499f9bff47622 · captured 1789025483.0 · version history

Cite this page as: encyclopegia.org, “LM13700”, snapshot lm13700-731438-cf1a578fc5ae307f. https://encyclopegia.org/a/lm13700

Sources cited in this revision

1 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.