Lesson plan

LM13700

for an OTA has inverting (V in- ) and noninverting (V in+ ) inputs, power supply lines (V + and V − ), two biasing inputs (I abc and I bias ), and a single output current I out . The LM13700 is an integrated circuit (IC) containing two current-controlled operational transconductance amplifiers (OTA), each having differential inputs and a push-pull output. Linearizing diodes at the input can optionally be used by applying a bias current into I to reduce distortion and allow increased input levels. The output bias can be programmed using an optional current into the I pin. Two unconnected Darlington emitter follower output buffers capable of 20 mA each can be optionally connected to each OTA's output to complement the OTA's wide dynamic range. The bias currents (and hence the output DC levels) of the Darlington output buffers on the LM13700 are independent of the I pin (unlike those on the LM13600). This may result in performance superior to that of the LM13600 in audio applications. This chip historically has been useful in audio electronics, especially in analog synthesizer circuits like voltage-controlled oscillators, voltage-controlled filters, and voltage-controlled amplifiers.

Back to article

Article summary

for an OTA has inverting (V in- ) and noninverting (V in+ ) inputs, power supply lines (V + and V − ), two biasing inputs (I abc and I bias ), and a single output current I out . The LM13700 is an integrated circuit (IC) containing two current-controlled operational transconductance amplifiers (OTA), each having differential inputs and a push-pull output. Linearizing diodes at the input can optionally be used by applying a bias current into I to reduce distortion and allow increased input levels. The output bias can be programmed using an optional current into the I pin. Two unconnected Darlington emitter follower output buffers capable of 20 mA each can be optionally connected to each OTA's output to complement the OTA's wide dynamic range. The bias currents (and hence the output DC levels) of the Darlington output buffers on the LM13700 are independent of the I pin (unlike those on the LM13600). This may result in performance superior to that of the LM13600 in audio applications. This chip historically has been useful in audio electronics, especially in analog synthesizer circuits like voltage-controlled oscillators, voltage-controlled filters, and voltage-controlled amplifiers.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.