Native Command Queuing

In computing, Native Command Queuing (NCQ) is an extension of the Serial ATA protocol allowing hard disk drives to internally optimize the order in which received read and write commands are executed.

Uses your system voice; voice and rate in settings.

≈ 8 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In computing, Native Command Queuing (NCQ) is an extension of the Serial ATA protocol allowing hard disk drives to internally optimize the order in which received read and write commands are executed. This can reduce the amount of unnecessary drive head movement, resulting in increased performance (and slightly decreased wear of the drive) for workloads where multiple simultaneous read/write requests are outstanding, most often occurring in server-type applications.

  • 3 Solid-state drives
  • 4 See also
  • 5 References
  • 6 External links
  • History

    edit edit source

    Native Command Queuing was preceded by Parallel ATA's version of Tagged Command Queuing (TCQ). ATA's attempt at integrating TCQ was constrained by the requirement that ATA host bus adapters use ISA bus device protocols to interact with the operating system. The resulting high CPU overhead and negligible performance gain contributed to a lack of market acceptance for ATA TCQ.

    NCQ differs from TCQ in that, with NCQ, each command is of equal importance, but NCQ's host bus adapter also programs its own first party DMA engine with CPU-given DMA parameters during its command sequence whereas TCQ interrupts the CPU during command queries and requires it to modulate the ATA host bus adapter's third party DMA engine. NCQ's implementation is preferable because the drive has more accurate knowledge of its performance characteristics and is able to account for its rotational position. Both NCQ and TCQ have a maximum queue length of 32 outstanding commands.[1][2] Because the ATA TCQ is rarely used, Parallel ATA (and the IDE mode of some chipsets) usually only support one outstanding command per port.

    For NCQ to be enabled, it must be supported and enabled in the SATA host bus adapter and in the hard drive itself. The appropriate driver must be loaded into the operating system to enable NCQ on the host bus adapter.[3]

    Many newer chipsets support the Advanced Host Controller Interface (AHCI), which allows operating systems to universally control them and enable NCQ. DragonFly BSD has supported AHCI with NCQ since 2.3 in 2009.[4][5] Linux kernels support AHCI natively since version 2.6.19, and FreeBSD fully supports AHCI since version 8.0. Windows Vista and Windows 7 also natively support AHCI, but their AHCI support (via the msahci service) must be manually enabled via registry editing if controller support was not present during their initial install. Windows 7's AHCI enables not only NCQ but also TRIM support on SSD drives (with their supporting firmware). Older operating systems such as Windows XP require the installation of a vendor-specific driver (similar to installing a RAID or SCSI controller) even if AHCI is present on the host bus adapter, which makes initial setup more tedious and conversions of existing installations relatively difficult as most controllers cannot operate their ports in mixed AHCI–SATA/IDE/legacy mode.

    Hard disk drives

    edit edit source

    Performance

    edit edit source

    A 2004 test with the first-generation NCQ drive (Seagate 7200.7 NCQ) found that while NCQ increased IOMeter performance, desktop application performance decreased.[6] One review in 2010 found improvements on the order of 9% (on average) with NCQ enabled in a series of Windows multitasking tests.[7]

    NCQ can negatively interfere with the operating system's I/O scheduler, decreasing performance;[8] this has been observed in practice on Linux with RAID-5.[9] There is no mechanism in NCQ for the host to specify any sort of deadlines for an I/O, like how many times a request can be ignored in favor of others. In theory, a queued request can be delayed by the drive an arbitrary amount of time while it is serving other (possibly new) requests under I/O pressure.[8] Since the algorithms used inside drives' firmware for NCQ dispatch ordering are generally not publicly known, this introduces another level of uncertainty for hardware/firmware performance. Tests at Google around 2008 have shown that NCQ can delay an I/O for up to 1–2 seconds. A proposed workaround is for the operating system to artificially starve the NCQ queue sooner in order to satisfy low-latency applications in a timely manner.[10]

    On some drives' firmware, such as the WD Raptor circa 2007, read-ahead is disabled when NCQ is enabled, resulting in slower sequential performance.[11]

    SATA solid-state drives profit significantly from being able to queue multiple commands for parallel workloads. For PCIe-based NVMe SSDs, the queue depth was even increased to support a maximum of 65,535 queues with up to 65,535 commands each.

    Safety (FUA)

    edit edit source

    One lesser-known feature of NCQ is that, unlike its ATA TCQ predecessor, it allows the host to specify whether it wants to be notified when the data reaches the disk's platters, or when it reaches the disk's buffer (on-board cache). Assuming a correct hardware implementation, this feature allows data consistency to be guaranteed when the disk's on-board cache is used in conjunction with system calls like fsync.[12] The associated write flag, which is also borrowed from SCSI, is called Force Unit Access (FUA).[13][14][15]

    Solid-state drives

    edit edit source

    NCQ is also used in newer solid-state drives where the drive encounters latency on the host, rather than the other way around. For example, Intel's X25-E Extreme solid-state drive uses NCQ to ensure that the drive has commands to process while the host system is busy processing CPU tasks.[16]

    NCQ also enables the SSD controller to complete commands concurrently (or partly concurrently, for example using pipelines) where the internal organisation of the device enables such processing.

    The NVM Express (NVMe) standard also supports command queuing, in a form optimized for SSDs.[17] NVMe allows multiple queues for a single controller and device, allowing at the same time much higher depths for each queue, which more closely matches how the underlying SSD hardware works.[18]

    See also

    edit edit source

    References

    edit edit source
    1. ^ PDF white paper on NCQ from Intel and Seagate Wikipedia revision 1374924250, retrieved 2026-11-21
    2. ^ "Volume 1 of the final draft of the ATA-7 standard" (PDF). Archived from the original (PDF) on 2012-02-06. Retrieved 2007-01-02. Wikipedia revision 1374924250, retrieved 2026-11-21
    3. ^ "SATA II Native Command Queuing Overview", Intel Whitepaper, April 2003. Wikipedia revision 1374924250, retrieved 2026-11-21
    4. ^ Matthew Dillon (2009-06-04). ""Re: DragonFly-2.3.1.165.g25822 master sys/dev/disk/ahci Makefile TODO ahci.c ahci.h ahci_attach.c ahci_cam.c ahci_dragonfly.c ahci_dragonfly.h atascsi.h"". Wikipedia revision 1374924250, retrieved 2026-11-21
    5. ^ Matthew Dillon (2009). "ahci(4) — Advanced Host Controller Interface for Serial ATA". BSD Cross Reference. DragonFly BSD.
    6. ^ "Seagate's Barracuda 7200.7 NCQ hard drive - The Tech Report - Page 13". The Tech Report. 17 December 2004. Retrieved 2014-01-11. Wikipedia revision 1374924250, retrieved 2026-11-21
    7. ^ "Multitasking with Native Command Queuing - The Tech Report - Page 5". The Tech Report. 3 August 2005. Retrieved 2014-01-11. Wikipedia revision 1374924250, retrieved 2026-11-21
    8. ^ a b Yu, Y. J.; Shin, D. I.; Eom, H.; Yeom, H. Y. (2010). "NCQ vs. I/O scheduler". ACM Transactions on Storage. 6: 1–37. doi:10.1145/1714454.1714456. S2CID 14414608. [1] Archived 2014-01-11 at the Wayback Machine Wikipedia revision 1374924250, retrieved 2026-11-21
    9. ^ "hard drive - Poor Linux software RAID 5 performance with NCQ". Server Fault. Retrieved 2014-01-11. Wikipedia revision 1374924250, retrieved 2026-11-21
    10. ^ Gwendal Grignou, NCQ Emulation, FLS'08 talk summary (p. 109) slides Wikipedia revision 1374924250, retrieved 2026-11-21
    11. ^ "Mark Lord: Re: Lower HD transfer rate with NCQ enabled?". LKML. 2007-04-03. Retrieved 2014-01-11. Wikipedia revision 1374924250, retrieved 2026-11-21
    12. ^ Marshall Kirk McKusick. "Disks from the Perspective of a File System - ACM Queue". Queue.acm.org. Retrieved 2014-01-11. Wikipedia revision 1374924250, retrieved 2026-11-21
    13. ^ Gregory Smith (2010). PostgreSQL 9.0: High Performance. Packt Publishing Ltd. p. 78. ISBN 978-1-84951-031-8. Wikipedia revision 1374924250, retrieved 2026-11-21
    14. ^ "Native Command Queuing" (PDF). Archived from the original (PDF) on 2004-05-17. Wikipedia revision 1374924250, retrieved 2026-11-21
    15. ^ Jonathan Corbet (2010-08-18). "The end of block barriers". LWN.net. Retrieved 2015-06-27. Wikipedia revision 1374924250, retrieved 2026-11-21
    16. ^ Gasior, Geoff (November 23, 2008). "Intel's X25-E Extreme solid-state drive - Now with single-level cell flash memory". Tech Report. Wikipedia revision 1374924250, retrieved 2026-11-21
    17. ^ Dave Landsman (2013-08-09). "AHCI and NVMe as Interfaces for SATA Express Devices – Overview" (PDF). SATA-IO. Retrieved 2013-10-02. Wikipedia revision 1374924250, retrieved 2026-11-21
    18. ^ "NVM Express Overview". nvmexpress.org. Retrieved 2014-11-26. Wikipedia revision 1374924250, retrieved 2026-11-21
    edit edit source

    Text derived from https://en.wikipedia.org/w/index.php?oldid=1374924250 under CC BY-SA 4.0; modifications have been made.

    Words in each sectionHistoryHistoryHistory: 401 words401Hard disk drivesHard disk drivesHard disk drives: 391 words391Solid-state drivesSolid-state drivesSolid-state drives: 135 words135See alsoSee alsoSee also: 8 words8
    Words in each section. Measured from the stored article body; sections below the minimum are not plotted.

    Provenance

    snapshot enwiki-001374924250 · captured 2026-09-14 · ledger · version history

    Cite this page as: encyclopegia.org, “Native Command Queuing”, snapshot enwiki-001374924250. https://encyclopegia.org/a/native-command-queuing