Negative imaginary systems
≈ 3 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
Negative imaginary (NI) systems theory was introduced by Lanzon and Petersen in. A generalization of the theory was presented in In the single-input single-output (SISO) case, such systems are defined by considering the properties of the imaginary part of the frequency response G(jω) and require the system to have no poles in the right half plane and j(G(j\omega )-G(j\omega )^{\ast }) > 0 for all ω in (0, ∞). This means that a system is Negative imaginary if it is both stable and a nyquist plot will have a phase lag between [-π 0] for all ω > 0.
Negative imaginary (NI) systems theory was introduced by Lanzon and Petersen in. A generalization of the theory was presented in In the single-input single-output (SISO) case, such systems are defined by considering the properties of the imaginary part of the frequency response G(jω) and require the system to have no poles in the right half plane and j(G(j\omega )-G(j\omega )^{\ast }) > 0 for all ω in (0, ∞). This means that a system is Negative imaginary if it is both stable and a nyquist plot will have a phase lag between [-π 0] for all ω > 0.
If s=j\omega _{0}, \omega _{0}>0 is a pole of G(s) , then it is a simple pole and furthermore, the residual matrix K = \lim_{s\to j\omega _{0}} (s-j\omega _{0}) jG(s) is Hermitian and positive semidefinite. If s=0 is a pole of G(s) , then \lim_{s\to 0} s^{k}G(s)=0 for all k\geq3 and \lim_{s\to 0} s^{2}G(s) is Hermitian and positive semidefinite. These conditions can be summarized as: The system G(s) is stable.
For all positive frequencies, the nyquist diagram of the system response is between [-π 0]. \end{bmatrix} be a minimal realization of the transfer function matrix G(s) . Then, G(s) is NI if and only if D=D^T and there exists a matrix P=P^{T}\geq 0, \text { } W\in \mathbb{R}^{m \times m}, \text {and } L\in \mathbb{R}^{m \times n} such that the following LMI is satisfied: \begin{bmatrix} PA+A^{T}P & PB-A^{T}C^{T} \\ B^{T}P-CA & -(CB+B^{T}C^{T}) \end{bmatrix} = \begin{bmatrix} -L^{T}L & -L^{T}W \\ -W^{T}L & -W^{T}W \end{bmatrix} \leq 0.
This result comes from positive real theory after converting the negative imaginary system to a positive real system for analysis.
References
Text derived from https://en.wikipedia.org/w/index.php?oldid=1368294623 under CC BY-SA 4.0; modifications have been made.