Lesson plan

Negative imaginary systems

Negative imaginary (NI) systems theory was introduced by Lanzon and Petersen in. A generalization of the theory was presented in In the single-input single-output (SISO) case, such systems are defined by considering the properties of the imaginary part of the frequency response G(jω) and require the system to have no poles in the right half plane and j(G(j\omega )-G(j\omega )^{\ast }) > 0 for all ω in (0, ∞). This means that a system is Negative imaginary if it is both stable and a nyquist plot will have a phase lag between [-π 0] for all ω > 0.

Back to article

Article summary

Negative imaginary (NI) systems theory was introduced by Lanzon and Petersen in. A generalization of the theory was presented in In the single-input single-output (SISO) case, such systems are defined by considering the properties of the imaginary part of the frequency response G(jω) and require the system to have no poles in the right half plane and j(G(j\omega )-G(j\omega )^{\ast }) > 0 for all ω in (0, ∞). This means that a system is Negative imaginary if it is both stable and a nyquist plot will have a phase lag between [-π 0] for all ω > 0.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.