Null fill

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Null fill in radio engineering is used in radio antenna systems which are located on mountains or tall towers, to prevent too much of the signal from overshooting the nearest part of intended coverage area. Phasing is used between antenna elements to take power away from the main lobe and electrically direct more of it at a more downward angle in the vertical plane. This requires a phased array. Changing the relative power supplied to each element also changes the radiation pattern in this manner, and often both methods are used in combination.

Null fill in radio engineering is used in radio antenna systems which are located on mountains or tall towers, to prevent too much of the signal from overshooting the nearest part of intended coverage area. Phasing is used between antenna elements to take power away from the main lobe and electrically direct more of it at a more downward angle in the vertical plane. This requires a phased array. Changing the relative power supplied to each element also changes the radiation pattern in this manner, and often both methods are used in combination.

See also

Null (radio) Beam tilt

References

"Analysis of Antenna Null-fill and Broadcast Coverage." Myron D. Fanton. ERI Technical Series, vol. 6, April 2006.* "The Tide is Turning." Charles Rhodes. [http://www.tvtechnology.com/features/digital_tv/F_CharlesRhodes.shtml "A Study on Null-Fill Array Antenna for Service Coverage Expansion in PCS Band" Youngseok Ko

Text derived from https://en.wikipedia.org/w/index.php?oldid=1355219526 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.