Otranto Bridge

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The Otranto Bridge was located northwest of St. Ansgar, Iowa, United States. It carried traffic on 480th Avenue over the Cedar River for . The supervisors from Mitchell County contracted with the Chicago Bridge and Iron Company (CBI) to build two bridges in the county. Chicago engineer Horace E. Horton from CBI designed this Camelback through truss bridge. It replaced and older span at the same location, and it was completed in 1899 for $3,257. The Otranto Bridge was one of the few Camelback through truss bridges built in Iowa. It was replaced by a modern bridge and was privately owned before being dismantled. The bridge was listed on the National Register of Historic Places in 1998. It was removed in 2020.

The Otranto Bridge was located northwest of St. Ansgar, Iowa, United States. It carried traffic on 480th Avenue over the Cedar River for . The supervisors from Mitchell County contracted with the Chicago Bridge and Iron Company (CBI) to build two bridges in the county. Chicago engineer Horace E. Horton from CBI designed this Camelback through truss bridge. It replaced and older span at the same location, and it was completed in 1899 for $3,257. The Otranto Bridge was one of the few Camelback through truss bridges built in Iowa. It was replaced by a modern bridge and was privately owned before being dismantled. The bridge was listed on the National Register of Historic Places in 1998. It was removed in 2020.

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1372958363 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

1 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.