Lesson plan

Otranto Bridge

The Otranto Bridge was located northwest of St. Ansgar, Iowa, United States. It carried traffic on 480th Avenue over the Cedar River for . The supervisors from Mitchell County contracted with the Chicago Bridge and Iron Company (CBI) to build two bridges in the county. Chicago engineer Horace E. Horton from CBI designed this Camelback through truss bridge. It replaced and older span at the same location, and it was completed in 1899 for $3,257. The Otranto Bridge was one of the few Camelback through truss bridges built in Iowa. It was replaced by a modern bridge and was privately owned before being dismantled. The bridge was listed on the National Register of Historic Places in 1998. It was removed in 2020.

Back to article

Article summary

The Otranto Bridge was located northwest of St. Ansgar, Iowa, United States. It carried traffic on 480th Avenue over the Cedar River for . The supervisors from Mitchell County contracted with the Chicago Bridge and Iron Company (CBI) to build two bridges in the county. Chicago engineer Horace E. Horton from CBI designed this Camelback through truss bridge. It replaced and older span at the same location, and it was completed in 1899 for $3,257. The Otranto Bridge was one of the few Camelback through truss bridges built in Iowa. It was replaced by a modern bridge and was privately owned before being dismantled. The bridge was listed on the National Register of Historic Places in 1998. It was removed in 2020.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.