Polyetherimide
build plate on a Bambu Lab A1 mini FFF 3D printer Polyetherimide (PEI; branded as Ultem ) is an amorphous, amber-to-transparent thermoplastic with characteristics similar to the related plastic PEEK.
≈ 6 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
Polyetherimide (PEI; branded as Ultem[2]) is an amorphous, amber-to-transparent thermoplastic with characteristics similar to the related plastic PEEK. When comparing PEI to PEEK, the former is cheaper but has lower impact strength and a tighter temperature range.[3]
PEI plastics were first introduced into the market by General Electric (GE) in 1982 under the trade name Ultem resulting from the work of J.G. Wirth's research team in the early 1970s.[4][5]
Due to its adhesive properties and chemical stability it became a popular bed material for FFF 3D printers.
Contents
Structure
edit edit sourceThe molecular formula of the PEI repeating unit is C37H24O6N2 and the molecular weight is 592.61 g/mol.[6] It contains phthalimide and bisphenol A sub-units.
Properties
edit edit sourceThe glass transition temperature of PEI is 217 °C (422 °F). Its amorphous density at 25 °C is 1.27 g/cm3(.046 lb/in3). It is prone to stress cracking in chlorinated solvents. Polyetherimide is able to resist high temperatures while maintaining stable electrical properties over a wide range of frequencies. This high strength material offers excellent chemical resistance and ductile properties suitable for various applications, even those involving steam exposure.[7]
Production
edit edit sourcePEIs are manufactured by the imidization reaction of a flexible dianhydride and m-Phenylenediamine.[8][9]
References
edit edit source- ^ Sastri, Vinny R. (2014-01-01), "8 - High-Temperature Engineering Thermoplastics: Polysulfones, Polyimides, Polysulfides, Polyketones, Liquid Crystalline Polymers, and Fluoropolymers", in Sastri, Vinny R. (ed.), Plastics in Medical Devices (Second Edition), Oxford: William Andrew Publishing, p. 183, doi:10.1016/b978-1-4557-3201-2.00008-2, ISBN 978-1-4557-3201-2, retrieved 2025-05-05 Wikipedia revision 1360729342, retrieved 2026-11-20
- ^ "Ultem". Curbell Plastics. Retrieved 2 November 2023. Wikipedia revision 1360729342, retrieved 2026-11-20
- ^ http://www.mcmaster.com/#ultem/=otzvqt Referenced Oct 7, 2013 Wikipedia revision 1360729342, retrieved 2026-11-20
- ^ "What Is Polyetherimide (PEI)?". Retrieved 2024-10-15. Wikipedia revision 1360729342, retrieved 2026-11-20
- ^ Melton, George H.; Peters, Edward N.; Arisman, Ruth K. (2011-01-01), "2 - Engineering Thermoplastics", in Kutz, Myer (ed.), Applied Plastics Engineering Handbook, Plastics Design Library, Oxford: William Andrew Publishing, p. 15, doi:10.1016/b978-1-4377-3514-7.10002-9, ISBN 978-1-4377-3514-7, retrieved 2025-05-05, Polyetherimide (PEI) was formally announced by GE in 1982. This amorphous polymer with the Ultem trade name resulted from the research work of a team headed by J.G. Wirth in the early 1970s. Wikipedia revision 1360729342, retrieved 2026-11-20
- ^ Scott, Chris. "polyetherimide information and properties". www.polymerprocessing.com. Retrieved 2018-04-30. Wikipedia revision 1360729342, retrieved 2026-11-20
- ^ "Injection Molding Material Selection Guide". www.abtecinc.com. Retrieved 2018-04-30. Wikipedia revision 1360729342, retrieved 2026-11-20
- ^ Sastri, Vinny R. (2014-01-01), "8 - High-Temperature Engineering Thermoplastics: Polysulfones, Polyimides, Polysulfides, Polyketones, Liquid Crystalline Polymers, and Fluoropolymers", in Sastri, Vinny R. (ed.), Plastics in Medical Devices (Second Edition), Oxford: William Andrew Publishing, p. 182, doi:10.1016/b978-1-4557-3201-2.00008-2, ISBN 978-1-4557-3201-2, retrieved 2025-05-05, Polyetherimides (PEIs) are manufactured by the reaction of a flexible anhydride and 1,3-diamino benzene. The anhydride is based on bisphenol A and has both ether and isopropylidene links. It is these two flexible links that provide the flexibility and melt processability to PEI compared to its wholly aromatic analogs. Wikipedia revision 1360729342, retrieved 2026-11-20
- ^ Melton, George H.; Peters, Edward N.; Arisman, Ruth K. (2011-01-01), "2 - Engineering Thermoplastics", in Kutz, Myer (ed.), Applied Plastics Engineering Handbook, Plastics Design Library, Oxford: William Andrew Publishing, p. 15, doi:10.1016/b978-1-4377-3514-7.10002-9, ISBN 978-1-4377-3514-7, retrieved 2025-05-05, The early laboratory process involved a costly and difficult synthesis. Further development resulted in a number of breakthroughs that led to a simplified, cost-effective production process. The final step of the process involves the imidization of a diacid anhydride with m-phenylene diamine Wikipedia revision 1360729342, retrieved 2026-11-20
types
- Acrylonitrile butadiene styrene (ABS)
- Cross-linked polyethylene (PEX, XLPE)
- Ethylene vinyl acetate (EVA)
- Poly(methyl methacrylate) (PMMA)
- Poly(ethyl methacrylate) (PEMA)
- Polyacrylic acid (PAA)
- Polyamide (PA)
- Polybutylene (PB)
- Polybutylene terephthalate (PBT)
- Polycarbonate (PC)
- Polyetheretherketone (PEEK)
- Polyester (PEs)
- Polyethylene (PE)
- Polyethylene terephthalate (PET, PETE)
- Polyimide (PI)
- Polylactic acid (PLA)
- Polyoxymethylene (POM)
- Polyphenyl ether (PPE)
- Poly(p-phenylene oxide) (PPO)
- Polypropylene (PP)
- Polystyrene (PS)
- Polysulfone (PES)
- Polytetrafluoroethylene (PTFE)
- Polyurethane (PU)
- Polyvinyl chloride (PVC)
- Polyvinylidene chloride (PVDC)
- Styrene maleic anhydride (SMA)
- Styrene-acrylonitrile (SAN)
- Tritan copolyester
types
processing
and health
- Bisphenol A (BPA, in Polycarbonates)
- Vinyl chloride (in PVC)
Text derived from https://en.wikipedia.org/w/index.php?oldid=1360729342 under CC BY-SA 4.0; modifications have been made.