Pulse-cross

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A pulse-cross is the representation of normally invisible portions of an analog video signal on a studio screen for error analysis . During normal operation, parts of the video signal are not displayed and instead fall outside the normal viewing region of a screen. By offsetting the video signal, these additional parts become visible Only part of an analog video signal contains image information: with a 625-line video signal, each field lasts 20 ms. Of these, only 18.4 ms (287.5 lines) are provided for image information; the remaining 1.6 ms (25 lines) form the vertical blanking interval, a time reserved for the vertical retrace of the electron beam. Likewise, of the 64 μs of each line, only 52 μs contain image information; the remaining 12 μs form the horizontal blanking interval for the horizontal retrace. These blanking intervals are thus outside the picture. A pulse-cross circuit delays synchronization in the monitor, shifting the image to the left or up . This reveals areas of the video signal that are usually outside the image. In addition, the circuit reduces the contrast of the image, so that the sync pulses are also shown, where the voltage is below the black level .…

A pulse-cross is the representation of normally invisible portions of an analog video signal on a studio screen for error analysis . During normal operation, parts of the video signal are not displayed and instead fall outside the normal viewing region of a screen. By offsetting the video signal, these additional parts become visible Only part of an analog video signal contains image information: with a 625-line video signal, each field lasts 20 ms. Of these, only 18.4 ms (287.5 lines) are provided for image information; the remaining 1.6 ms (25 lines) form the vertical blanking interval, a time reserved for the vertical retrace of the electron beam. Likewise, of the 64 μs of each line, only 52 μs contain image information; the remaining 12 μs form the horizontal blanking interval for the horizontal retrace. These blanking intervals are thus outside the picture. A pulse-cross circuit delays synchronization in the monitor, shifting the image to the left or up . This reveals areas of the video signal that are usually outside the image. In addition, the circuit reduces the contrast of the image, so that the sync pulses are also shown, where the voltage is below the black level . In a standard-compliant video signal, the vertical synchronization signal consists of five long pulses of 59.3 μs duration and is framed by five 2.35 μs short pulses before and after, the pre-equalizing pulses. Home computers, game consoles, etc. often do not provide a standard-compliant signal: the sync signal contains no gaps and no pre-equalizing pulses. A pulse-cross circuit will reveal these inaccuracies. For PAL color coding, the color burst signal can be seen in the form of an orange bar. For a pure black and white signal, the burst is missing. Furthermore, the timing error of a video recorder can be recognized on the signal cross. Switching the video heads will cause a single line in the image to be either too long or too short. This error can be corrected by a time base corrector.

Literature

Ru van Wezel, Video-Handbuch (German language) Martin Hinner, PAL video timing specification

Text derived from https://en.wikipedia.org/w/index.php?oldid=1378698235 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

3 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.