Lesson plan
Pulse-cross
A pulse-cross is the representation of normally invisible portions of an analog video signal on a studio screen for error analysis . During normal operation, parts of the video signal are not displayed and instead fall outside the normal viewing region of a screen. By offsetting the video signal, these additional parts become visible Only part of an analog video signal contains image information: with a 625-line video signal, each field lasts 20 ms. Of these, only 18.4 ms (287.5 lines) are provided for image information; the remaining 1.6 ms (25 lines) form the vertical blanking interval, a time reserved for the vertical retrace of the electron beam. Likewise, of the 64 μs of each line, only 52 μs contain image information; the remaining 12 μs form the horizontal blanking interval for the horizontal retrace. These blanking intervals are thus outside the picture. A pulse-cross circuit delays synchronization in the monitor, shifting the image to the left or up . This reveals areas of the video signal that are usually outside the image. In addition, the circuit reduces the contrast of the image, so that the sync pulses are also shown, where the voltage is below the black level .…
Article summary
A pulse-cross is the representation of normally invisible portions of an analog video signal on a studio screen for error analysis . During normal operation, parts of the video signal are not displayed and instead fall outside the normal viewing region of a screen. By offsetting the video signal, these additional parts become visible Only part of an analog video signal contains image information: with a 625-line video signal, each field lasts 20 ms. Of these, only 18.4 ms (287.5 lines) are provided for image information; the remaining 1.6 ms (25 lines) form the vertical blanking interval, a time reserved for the vertical retrace of the electron beam. Likewise, of the 64 μs of each line, only 52 μs contain image information; the remaining 12 μs form the horizontal blanking interval for the horizontal retrace. These blanking intervals are thus outside the picture. A pulse-cross circuit delays synchronization in the monitor, shifting the image to the left or up . This reveals areas of the video signal that are usually outside the image. In addition, the circuit reduces the contrast of the image, so that the sync pulses are also shown, where the voltage is below the black level .…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.