Serial Vector Format

Serial Vector Format (SVF) is a file format that contains boundary scan vectors to be sent to an electronic circuit using a JTAG interface. Boundary scan vectors consist of the following data: * Stimulus data: This is data to be sent to a device or electronic circuit * Expected response: This is the data the device or circuit is expected to send back if there is no error * Mask data: Defines which bits in the expected response are valid; other bits of the device's response are unknown and must be ignored when comparing the expected response and the data returned from the circuit * Additional information on how to send the data (e.g. maximum clock frequency) The SVF standard was jointly developed by companies Texas Instruments and Teradyne. Control over the format has been handed off to boundary-scan solution provider ASSET InterTech. The most recent revision is Revision E. SVF files are used to transfer boundary scan data between tools. As an example a VHDL compiler may create an SVF file that is read by a tool for programming CPLDs. The SVF file is defined as an ASCII file that consists of a set of SVF statements. The maximum number of characters allowed on a line is 256, although one SVF statement can span more than one line. Each statement consists of a command and associated parameters. Each SVF statement is terminated by a semicolon. SVF is not case sensitive.…

Serial Vector Format (SVF) is a file format that contains boundary scan vectors to be sent to an electronic circuit using a JTAG interface. Boundary scan vectors consist of the following data: Stimulus data: This is data to be sent to a device or electronic circuit Expected response: This is the data the device or circuit is expected to send back if there is no error Mask data: Defines which bits in the expected response are valid; other bits of the device's response are unknown and must be ignored when comparing the expected response and the data returned from the circuit Additional information on how to send the data (e.g. maximum clock frequency) The SVF standard was jointly developed by companies Texas Instruments and Teradyne. Control over the format has been handed off to boundary-scan solution provider ASSET InterTech. The most recent revision is Revision E. SVF files are used to transfer boundary scan data between tools. As an example a VHDL compiler may create an SVF file that is read by a tool for programming CPLDs. The SVF file is defined as an ASCII file that consists of a set of SVF statements. The maximum number of characters allowed on a line is 256, although one SVF statement can span more than one line. Each statement consists of a command and associated parameters. Each SVF statement is terminated by a semicolon. SVF is not case sensitive. Comments can be inserted into a SVF file after an exclamation point ‘!’ or a pair of slashes ‘//’. Either ‘//’ or ‘!’ will comment out the remainder of the line.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1346151409 under CC BY-SA 4.0; modifications have been made.