Serial Vector Format

Article summary

Serial Vector Format (SVF) is a file format that contains boundary scan vectors to be sent to an electronic circuit using a JTAG interface. Boundary scan vectors consist of the following data: * Stimulus data: This is data to be sent to a device or electronic circuit * Expected response: This is the data the device or circuit is expected to send back if there is no error * Mask data: Defines which bits in the expected response are valid; other bits of the device's response are unknown and must be ignored when comparing the expected response and the data returned from the circuit * Additional information on how to send the data (e.g. maximum clock frequency) The SVF standard was jointly developed by companies Texas Instruments and Teradyne. Control over the format has been handed off to boundary-scan solution provider ASSET InterTech. The most recent revision is Revision E. SVF files are used to transfer boundary scan data between tools. As an example a VHDL compiler may create an SVF file that is read by a tool for programming CPLDs. The SVF file is defined as an ASCII file that consists of a set of SVF statements. The maximum number of characters allowed on a line is 256, although one SVF statement can span more than one line. Each statement consists of a command and associated parameters. Each SVF statement is terminated by a semicolon. SVF is not case sensitive.…

Key claims

No claims recorded.

Discussion questions

1. Summarise the article in your own words. Which single claim would you verify first, and why?
2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.