Spatial dispersion

Uses your system voice; voice and rate in settings.

Snapshot

≈ 7 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

consisting of split-ring resonators. These structures may exhibit strong spatial dispersion beyond their homogenization limit. In the physics of continuous media, spatial dispersion is a phenomenon where material parameters such as the permittivity or conductivity have dependence on wavevector. Normally such a dependence is assumed to be absent for simplicity, however spatial dispersion exists to varying degrees in all materials. The underlying physical reason for the wavevector dependence is often that the material has some spatial structure smaller than the wavelength of any signals (such as light or sound) being considered. Since these small spatial structures cannot be resolved by the waves, only indirect effects (e.g. wavevector dependence) remain detectable. In such a case, although the light cannot resolve the individual atoms, they nevertheless can as an aggregate affect how the light propagates. Another common mechanism is that the (e.g.) light is coupled to an excitation of the material, such as a plasmon. Spatial dispersion can be compared to temporal dispersion, the latter often just called dispersion. Temporal dispersion represents memory effects in systems, commonly seen in optics and electronics. Spatial dispersion on the other hand represents spreading effects and is usually significant only at microscopic length scales.…

consisting of split-ring resonators. These structures may exhibit strong spatial dispersion beyond their homogenization limit. In the physics of continuous media, spatial dispersion is a phenomenon where material parameters such as the permittivity or conductivity have dependence on wavevector. Normally such a dependence is assumed to be absent for simplicity, however spatial dispersion exists to varying degrees in all materials. The underlying physical reason for the wavevector dependence is often that the material has some spatial structure smaller than the wavelength of any signals (such as light or sound) being considered. Since these small spatial structures cannot be resolved by the waves, only indirect effects (e.g. wavevector dependence) remain detectable. In such a case, although the light cannot resolve the individual atoms, they nevertheless can as an aggregate affect how the light propagates. Another common mechanism is that the (e.g.) light is coupled to an excitation of the material, such as a plasmon. Spatial dispersion can be compared to temporal dispersion, the latter often just called dispersion. Temporal dispersion represents memory effects in systems, commonly seen in optics and electronics. Spatial dispersion on the other hand represents spreading effects and is usually significant only at microscopic length scales. Spatial dispersion contributes relatively small perturbations to optics, providing weak effects such as optical activity. Spatial dispersion and temporal dispersion may occur in the same system. Spatial dispersion is also distinct from anisotropic effects like birefringence. In such phenomena, the effective material parameters felt by a wave depend on direction of the wavevector, but that can be entirely captured as a tensorial material parameter where the tensor components are independent of wavevector. By contrast, spatial dispersion means that the tensor parameter itself depends on the wavevector — its magnitude and (often) direction too. As an example, consider the current J(x,t) that is driven in response to an electric field E(x,t) , which is varying in space (x) and time (t). Simplified laws such as Ohm's law would say that these are directly proportional to each other, J = \sigma E , but this breaks down if the system has memory (temporal dispersion) or spreading (spatial dispersion). The most general linear response is given by: J(x,t) = \int_{-\infty}^{-\infty} dx' \int_{-\infty}^{-\infty} dt'\, \sigma(x, x', t, t') E(x', t'), where \sigma(x, x', t, t')dx'\,dt' is the nonlocal conductivity function. If the system is invariant in time (time translation symmetry) and invariant in space (space translation symmetry), then we can simplify because \sigma(x, x', t, t') = \sigma_{\rm sym}(x-x', t-t') for some convolution kernel \sigma_{\rm sym} . We can also consider plane wave solutions for E and J like so: J(x,t) = \operatorname{Re}(J_0 e^{i k x - i \omega t}) E(x,t) = \operatorname{Re}(E_0 e^{i k x - i \omega t}) which yields a remarkably simple relationship between the two plane waves' complex amplitudes: J_0 = \tilde\sigma(k,\omega) E_0. where the function \tilde\sigma(k,\omega) is given by a Fourier transform of the space-time response function: \tilde\sigma(k,\omega) = \int_{-\infty}^{-\infty} dx \int_{-\infty}^{-\infty} dt \, e^{-i k x + i \omega t} \sigma_{\rm sym}(x, t). The conductivity function \tilde\sigma(k,\omega) has spatial dispersion if it is dependent on the wavevector k. This occurs if the spatial function \sigma_{\rm sym}(x-x', t-t') is not pointlike (delta function) response in x-x' . P_i(\vec k,\omega) = \sum_j (\epsilon_{ij}(\vec k, \omega) - \epsilon_0\delta_{ij}) E_j(\vec k, \omega), i.e., the permittivity is a wavevector- and frequency-dependent tensor. Considering Maxwell's equations, one can find the plane wave normal modes inside such crystals. These occur when the following relationship is satisfied for a nonzero electric field vector \vec E : \omega^2 \mu_0 \epsilon(\vec k, \omega)\vec E - (\vec k \cdot \vec k) \vec E + (\vec k \cdot \vec E) \vec k = 0 . Spatial dispersion in \epsilon(\vec k, \omega) can lead to strange phenomena, such as the existence of multiple modes at the same frequency and wavevector direction, but with different wavevector magnitudes. Nearby crystal surfaces and boundaries, it is no longer valid to describe system response in terms of wavevectors. For a full description it is necessary to return to a full nonlocal response function (without translational symmetry), however the end effect can sometimes be described by "additional boundary conditions" (ABC's). At nonzero frequencies, it is possible to represent all magnetizations as time-varying polarizations. Moreover, since the electric and magnetic fields are directly related by \nabla \times E = -\partial B/\partial t , the magnetization induced by a magnetic field can be represented instead as a polarization induced by the electric field, though with a highly dispersive relationship. What this means is that at nonzero frequency, any contribution to permeability μ can instead be alternatively represented by a spatially dispersive contribution to permittivity ε. The values of the permeability and permittivity are different in this alternative representation, however this leads to no observable differences in real quantities such as electric field, magnetic flux density, magnetic moments, and current. As a result, it is most common at optical frequencies to set μ to the vacuum permeability μ 0 and only consider a dispersive permittivity ε. There is some discussion over whether this is appropriate in metamaterials where effective medium approximations for μ are used, and debate over the reality of "negative permeability" seen in negative index metamaterials.

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1324433962 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001324433962 · captured 1764257694.0 · version history

Cite this page as: encyclopegia.org, “Spatial dispersion”, snapshot enwiki-001324433962. https://encyclopegia.org/a/spatial-dispersion

Sources cited in this revision

1 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.