Lesson plan

Spatial dispersion

consisting of split-ring resonators. These structures may exhibit strong spatial dispersion beyond their homogenization limit. In the physics of continuous media, spatial dispersion is a phenomenon where material parameters such as the permittivity or conductivity have dependence on wavevector. Normally such a dependence is assumed to be absent for simplicity, however spatial dispersion exists to varying degrees in all materials. The underlying physical reason for the wavevector dependence is often that the material has some spatial structure smaller than the wavelength of any signals (such as light or sound) being considered. Since these small spatial structures cannot be resolved by the waves, only indirect effects (e.g. wavevector dependence) remain detectable. In such a case, although the light cannot resolve the individual atoms, they nevertheless can as an aggregate affect how the light propagates. Another common mechanism is that the (e.g.) light is coupled to an excitation of the material, such as a plasmon. Spatial dispersion can be compared to temporal dispersion, the latter often just called dispersion. Temporal dispersion represents memory effects in systems, commonly seen in optics and electronics. Spatial dispersion on the other hand represents spreading effects and is usually significant only at microscopic length scales.…

Back to article

Article summary

consisting of split-ring resonators. These structures may exhibit strong spatial dispersion beyond their homogenization limit. In the physics of continuous media, spatial dispersion is a phenomenon where material parameters such as the permittivity or conductivity have dependence on wavevector. Normally such a dependence is assumed to be absent for simplicity, however spatial dispersion exists to varying degrees in all materials. The underlying physical reason for the wavevector dependence is often that the material has some spatial structure smaller than the wavelength of any signals (such as light or sound) being considered. Since these small spatial structures cannot be resolved by the waves, only indirect effects (e.g. wavevector dependence) remain detectable. In such a case, although the light cannot resolve the individual atoms, they nevertheless can as an aggregate affect how the light propagates. Another common mechanism is that the (e.g.) light is coupled to an excitation of the material, such as a plasmon. Spatial dispersion can be compared to temporal dispersion, the latter often just called dispersion. Temporal dispersion represents memory effects in systems, commonly seen in optics and electronics. Spatial dispersion on the other hand represents spreading effects and is usually significant only at microscopic length scales.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.