Lesson plan

Specific detectivity

Specific detectivity, or D*, for a photodetector is a figure of merit used to characterize performance, equal to the reciprocal of noise-equivalent power (NEP), normalized per square root of the sensor's area and frequency bandwidth (reciprocal of twice the integration time). Specific detectivity is given by D^*=\frac{\sqrt{A}}{NEP} , where A is the area of the photosensitive region of the detector, and NEP the noise equivalent power (in units of W/\sqrt{Hz} ) . It is commonly expressed in Jones units ( cm \cdot \sqrt{Hz}/ W ) in honor of Robert Clark Jones who originally defined it. Given that noise-equivalent power can be expressed as a function of the responsivity \mathfrak{R} (in units of A/W or V/W ) and the noise spectral density S_n (in units of A/Hz^{1/2} or V/Hz^{1/2} ) as NEP=\frac{S_n}{\mathfrak{R}} , it is common to see the specific detectivity expressed as D^*=\frac{\mathfrak{R}\cdot\sqrt{A}}{S_n} . It is often useful to express the specific detectivity in terms of relative noise levels present in the device. A common expression is given below.…

Back to article

Article summary

Specific detectivity, or D*, for a photodetector is a figure of merit used to characterize performance, equal to the reciprocal of noise-equivalent power (NEP), normalized per square root of the sensor's area and frequency bandwidth (reciprocal of twice the integration time). Specific detectivity is given by D^*=\frac{\sqrt{A}}{NEP} , where A is the area of the photosensitive region of the detector, and NEP the noise equivalent power (in units of W/\sqrt{Hz} ) . It is commonly expressed in Jones units ( cm \cdot \sqrt{Hz}/ W ) in honor of Robert Clark Jones who originally defined it. Given that noise-equivalent power can be expressed as a function of the responsivity \mathfrak{R} (in units of A/W or V/W ) and the noise spectral density S_n (in units of A/Hz^{1/2} or V/Hz^{1/2} ) as NEP=\frac{S_n}{\mathfrak{R}} , it is common to see the specific detectivity expressed as D^*=\frac{\mathfrak{R}\cdot\sqrt{A}}{S_n} . It is often useful to express the specific detectivity in terms of relative noise levels present in the device. A common expression is given below.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.