Stage loading

Stage Loading is a measure of the load on a turbomachinery stage, be it a part of a compressor, fan or turbine.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Stage Loading is a measure of the load on a turbomachinery stage, be it a part of a compressor, fan or turbine. The parameter, which is non-dimensional, is defined as: L = \frac{gJ{\Delta}H}{U^2} where: Imperial Units (SI Units) g acceleration of gravity ft/s/s (1.0) J mechanical equivalent of heat ft.lb/(s.hp) (1.0) {\Delta}H change in specific enthalpy over stage hp.s/lb (KW.s/Kg) U peripheral blade speed ft/s (m/s) Average stage loading has a very similar definition, where the number of stages, n, within the compressor, fan or turbine is used to provide an average value: L = \frac{gJ{\Delta}H}{nU^2} In this case the change in enthalpy is across the whole unit, not just a stage.

Similarly, the blade speed used is a mean for the whole device. The above equation shows that if blade speed cannot be increased for, say, mechanical or aerodynamic reasons, the number of stages has to be increased to get the average stage loading back to an acceptable level, to obtain a satisfactory level of efficiency. The ideal average stage loading for a turbine is about 1.8.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1341506338 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001341506338 · captured 1772549016.0 · version history

Cite this page as: encyclopegia.org, “Stage loading”, snapshot enwiki-001341506338. https://encyclopegia.org/a/stage-loading

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.