Standard linear solid Q model

In seismology, the standard linear solid Q model (SLS Q model) for attenuation and dispersion, also known as the Zener Q model, is one of many Q models that gives a definition of how the earth responds to seismic waves.

Uses your system voice; voice and rate in settings.

≈ 3 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In seismology, the standard linear solid Q model (SLS Q model) for attenuation and dispersion, also known as the Zener Q model, is one of many Q models that gives a definition of how the earth responds to seismic waves. When a plane wave propagates through a homogeneous viscoelastic medium, the effects of amplitude attenuation and velocity dispersion may be combined conveniently into a single dimensionless parameter, Q, the medium-quality factor.

Transmission losses may occur due to friction or fluid movement, and whatever the physical mechanism, they can be conveniently described with an empirical formulation where elastic moduli and propagation velocity are complex functions of frequency. Ursin and Toverud compared different Q models including the above model (SLS-model).

In order to compare the different models they considered plane-wave propagation in a homogeneous viscoelastic medium. They used the Kolsky-Futterman model as a reference and studied the SLS model. This model was compared with the Kolsky-Futterman model.

The Kolsky-Futterman model was first described in the article ‘Dispersive body waves’ by Futterman (1962).

Kolsky's attenuation-dispersion model

The Kolsky model assumes the attenuation α(w) to be strictly linear with frequency over the range of measurement: \alpha=\frac {(2 c_r Q_r)} \quad (1) And defines the phase velocity as: \frac {1}{c(w)} =\frac {1}{c_r} (1-\frac {1}{\pi Q_r} ln |\frac{w}{w_r}|) \quad (2)

SLS model

The standard linear solid model is developed from the stress-strain relation. Using a linear combination of springs and dashpots to represent elastic and viscous components, Ursin and Toverud used one relaxation time. The model was first developed by Zener.

The attenuation is given by: \alpha=\frac {(w\tau_r)^2}{c_0 Q_c \tau_r[1+(w\tau_r)^2]} \quad (3) And defines the phase velocity as: \frac {1}{c(w)} =\frac {1}{c_0} [1- \frac {(w\tau_r)^2}{Q_c[1+(w\tau_r)^2]}] \quad (4)

Computations

For each of the Q models, Ursin and Toverud computed the attenuation (1)(3) in the frequency band 0–300 Hz. Figure 1. presents the graph for the Kolsky model (blue) with two datasets (left and right) and same data – attenuation with c r =2000 m/s, Q r =100 and w r =2π100 Hz. The SLS model (green) has two different datasets, left c 0 =1990 m/s, Q c =100 and τ r −1 =2π100 right c 0 =1985 m/s, Q c =84.71 and τ r −1 =6.75x100

Text derived from https://en.wikipedia.org/w/index.php?oldid=1279626551 under CC BY-SA 4.0; modifications have been made.

Words in each sectionComputationsComputationsComputations: 114 words114SLS modelSLS modelSLS model: 92 words92Kolsky's attenuation-di…Kolsky's attenuation-dispersion modelKolsky's attenuation-dispersion model: 54 words54
Words in each section. Measured from the stored article body; sections below the minimum are not plotted.

Provenance

snapshot enwiki-001279626551 · captured 2025-03-09 · ledger · version history

Cite this page as: encyclopegia.org, “Standard linear solid Q model”, snapshot enwiki-001279626551. https://encyclopegia.org/a/standard-linear-solid-q-model

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.