statická určitost

when a structure's static equilibrium equations have no unique solution

Uses your system voice; voice and rate in settings.

The name shown is in cs. The article below is in English and is not a translation.

≈ 4 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

  • etstaatikaga määramatud ülesandedstaatikaga määramatu ülessanne, staatikaga määramatu ülesanne, staatikaga määramatud ülessanded
  • Polskistatyczna niewyznaczalność
  • Русскийстатическая определимостьстатическая неопределимость, гиперстатизм, изостатизм
  • Englishstatically indeterminatesuperstatic
  • bgстатическа определимост
  • Italianostatica delle struttureIperstaticità
  • DeutschStatische BestimmtheitStatisch unbestimmt
  • Українськастатично невизначувана
  • bsstatička neodređenost
  • hrstatička neodređenost
  • Românănedeterminare statică
  • shstatička neodređenost
  • Türkçehiperstatik sistemler
  • Nederlandsstatisch (on)bepaaldstatisch onbepaalde constructie, hyperstatisch, statisch onbepaald, statisch overbepaald, statisch bepaalde constructie, statisch bepaald
  • العربيةغير محدد استاتيكيا
  • Češtinastatická určitost
  • pmsstàtica strutural
  • cahiperestaticitat
  • asthiperestaticidá
  • فارسینامعین ایستایی
  • Españolhiperestáticohiperestatico, hiperestaticidad, estaticamente indeterminado, estáticamente indeterminado
  • Françaishyperstatismeisostatique, isostatisme, hypostatisme et hyperstatisme, hyperstaticité, hyperstatique, isostatisme, hypostatisme
  • Portuguêshiperestático
  • עבריתסיומת סטטית
  • 日本語不静定構造
  • 한국어부정정
  • 中文靜不定超静定
  • 中文超静定
  • 简体中文超静定
  • 繁體中文靜不定
  • 中文靜不定
  • 中文超静定
  • 中文靜不定

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Statically indeterminate is a condition when the equilibrium equations – force and moment equilibrium conditions – are insufficient for determining the internal forces and reactions on that structure.[1][2] The term, and its opposite, statically determinate, are used in statics, structural mechanics, and mechanical engineering.

Mathematics

edit edit source

Based on Newton's laws of motion, the equilibrium equations available for a two-dimensional body are:[2]

∑𝐅=0: the vectorial sum of the forces acting on the body equals zero. This translates to:
∑𝐇=0: the sum of the horizontal components of the forces equals zero;
∑𝐕=0: the sum of the vertical components of forces equals zero;
∑𝐌=0: the sum of the moments (about an arbitrary point) of all forces equals zero.

In the beam construction on the right, the four unknown reactions are VA, VB, VC, and HA. The equilibrium equations are:[2]

∑𝐕=0⟹𝐕A−𝐅v+𝐕B+𝐕C=0∑𝐇=0⟹𝐇A=0∑𝐌A=0⟹𝐅v⋅a−𝐕B⋅(a+b)−𝐕C⋅(a+b+c)=0

Since there are four unknown forces (or variables) ( VA, VB, VC, and HA) but only three equilibrium equations, this system of simultaneous equations does not have a unique solution. The structure is therefore classified as statically indeterminate.

To solve statically indeterminate systems (determine the various moment and force reactions within it), one considers the material properties and compatibility in deformations.

Statically determinate

edit edit source

If the support at B is removed, the reaction VB cannot occur, and the system becomes statically determinate (or isostatic).[3] Note that the system is completely constrained here. The system becomes an exact constraint kinematic coupling. The solution to the problem is:[2]

𝐇A=𝐅h𝐕C=𝐅v⋅aa+b+c𝐕A=𝐅v−𝐕C

If, in addition, the support at A is changed to a roller, the system can be moved horizontally, making it a mechanism rather than a structure, and reducing the number of reactions to three (without HA). As a result, the system becomes unstable or partly constrained, with the latter term preferable in distinguishing between this condition and when a system under equilibrium becomes unstable through a perturbation. In this case, the two unknowns VA and VC can be determined by resolving the vertical force equation and the moment equation simultaneously. The solution yields the same results as previously obtained. However, it is not possible to satisfy the horizontal force equation unless Fh = 0.[2]

Statical determinacy

edit edit source

Descriptively, a statically determinate structure can be defined as a structure where, if it is possible to find internal actions in equilibrium with external loads, those internal actions are unique. The structure has no possible states of self-stress, i.e. internal forces in equilibrium with zero external loads are not possible. Statical indeterminacy, however, is the existence of a non-trivial (non-zero) solution to the homogeneous system of equilibrium equations. It indicates the possibility of self-stress (stress in the absence of an external load) that may be induced by mechanical or thermal action.

Mathematically, this requires a stiffness matrix to have full rank.

A statically indeterminate structure can only be analyzed by including further information like material properties and deflections. Numerically, this can be achieved by using matrix structural analyses, finite element method (FEM) or the moment distribution method (Hardy Cross) .

Practically, a structure is called 'statically overdetermined' when it comprises more mechanical constraints – like walls, columns or bolts – than absolutely necessary for stability.

See also

edit edit source

References

edit edit source
  1. ^ Matheson, James Adam Louis (1971). Hyperstatic structures: an introduction to the theory of statically indeterminate structures (2nd ed.). London: Butterworths. ISBN 0408701749. OCLC 257600. Wikipedia revision 1315390009, retrieved 2026-11-21
  2. ^ a b c d e Megson, Thomas Henry Gordon (2014). "Analysis of statically indeterminate structures". Structural and stress analysis (Third ed.). Amsterdam: Elsevier. pp. 489–570. ISBN 9780080999364. OCLC 873568410. Wikipedia revision 1315390009, retrieved 2026-11-21
  3. ^ Carpinteri, Alberto (1997). Structural mechanics: a unified approach (1st ed.). London: E & FN Spon. ISBN 0419191607. OCLC 36416368. Wikipedia revision 1315390009, retrieved 2026-11-21
edit edit source

Text derived from https://en.wikipedia.org/w/index.php?oldid=1315390009 under CC BY-SA 4.0; modifications have been made.

Words in each sectionMathematicsMathematicsMathematics: 191 words191Statically determinateStatically determinateStatically determinate: 182 words182Statical determinacyStatical determinacyStatical determinacy: 172 words172See alsoSee alsoSee also: 14 words14
Words in each section. Measured from the stored article body; sections below the minimum are not plotted.

Provenance

snapshot statically-indeterminate-038880-cf3786c741971b97 · hash cf3786c741971b973bf40752e8778fb7b4b7aa8747bf20c23bd0c4d653c13334 · captured 2025-10-06 · ledger · version history

Cite this page as: encyclopegia.org, “statická určitost”, snapshot statically-indeterminate-038880-cf3786c741971b97. https://encyclopegia.org/a/statically-indeterminate